5pc Star Bit Set - 3/8in.Dr
Universal Joint Socket
Sizes : T30 | T40 | T45 | T50
T45 Used for Timing Belts on VAG Petrol and Diesel Engines

VAG Diesel Pump Sprocket Puller
15mm Hex Drive with 24mm Hex Retainer.
For removing the high pressure fuel pump on 1.4 | 1.6 | 2.0L TDi engines.
Applicable to VW and SEAT vehicles from 2008 - 2013.
OEM Code : T10489.

VAG Camshaft Adapter Socket
3/8in. Drive / S45C Steel.
Use to rotate and hold the intake camshaft during timing chain service
on 4 cylinder 1.8L and 2.0L TFSi generation III direct injection engines.

VAG Fuel Pump Sprocket Puller
For the removal of the high pressure pump sprocket.
on 1.6L and 2.0L TDi common rail diesel engines.
Also for removing the Pump Pulley on
1.6 / 2.0 - 6 cylinder TDi common rail diesel engines
OEM Code : T40064

Audi / VW Crankshaft Pulley Holding Tool
For holding the crankshaft pulley when removing or installing the crankshaft central bolt.
AUDI : A3 | A6 | Q5 2004 onwards
VW : TSI / TFSI engines with chain 1.8T | 2.0L 4V
OEM Code : T10355

Clamping Washer Heat Shield Tool
For the removal of, or fitting clamping washers
which are used on under body heat shields etc.
1/4in.Dr for use with cordless tools.
Applicable to Ford and VAG Group vehicles :
Audi / Seat / Skoda

Ford Timing Tool Set
for Ford / Mazda / VAG / Volvo
Provides checking and adjusting engine timing.
Camshaft / Crankshaft Locking and Adjusting Tools
Chain / Tooth Belt / Drive Belt Tension Tools
Crankshaft Sprocket Holder and Alignment Tools
Locking Bracket and Support Guides
TDC Indicator and Dial Test Indicator
Injection Pump Tools

Timing Tool Set
for Ford / Mazda / Volvo / VAG
For checking and adjusting the engine timing.
Camshaft Adjusting Tools.
Injection Pump Adjusting Tools.
Flywheel / Crankshaft Locking Tools.
Camshaft Sprocket Puller.
Feeler Gauge.

VAG Service Position Front End Support Guide Set
Suitable for extending the front panel of the vehicle
to provide increased space in engine compartment
for carrying out various service applications.
Guides : M8 x 1.25mm / M10 x 1.5mm
Applicable to :
Audi : A4 / A5 / A6 / A8 /Q5
Skoda : Superb
VW : Passat

VAG Camshaft Adjuster Sockets - 3/8in.Dr
For the camshaft adjustment of 4/3-way central valve.
Fitted to : Audi A3 | A4 | A5 | Q5 1.8
and VW 2.0 litre engines with chain drive

VAG Camshaft Sprocket Locking Tool
VAG 1.0L TSI 3 cylinder petrol engines
For locking the camshaft in position during engine timing and servicing.

OEM Code : T10476
Common to : CT4424 | CT4622 | CT4651

VAG Timing Tool Set
For Jetta / Santana / Gran Lavida / Golf 7
Locks camshaft when checking and adjusting timing
1.0 MPI and 1.0 MPI / GNC Petrol Engines
With Crankshaft Locking Bolt
Camshaft Adjusting plate
Camshaft Sprocket Locking Tool
Tension Adjusting Wrench
Assembly Tool

VAG Camshaft Spacer Set
2 sizes of spacers for locating
the AVS spline ends on the camshaft.
For Audi A4 2008 | Q5 2009
4 cylinder petrol injection 2.0L turbo engine
OEM Code : T40191

VAG Camshaft Locking Tool
Applicable to -
VW | AUDI 1.4 / 1.6L
VW Lupo | Polo | Golf IV | Bora / Audi A2 vehicles
OEM Codes : T10016 | T10074

VAG Adjustable Camshaft Locking Tool
for VW 12 - 30 Valve vehicles.
For precise assembly of the auxiliary belt
avoiding distortion of the camshaft.
Adjustable camshaft locking strap will hold the twin cams in place.
OEM Codes : 3391 | 3242 | 3243

VAG V6 Camshaft Alignment Tool
Applicable to 1995-2004
new body style VW and AUDI models.
OEM Code : VAG 3391

VAG V6 Camshaft Alignment Tool
Essential tool for locking and setting the camshaft
and crankshaft during timing belt replacement.
With Mounting Bracket for difficult access.
Applicable to :
Audi : 80 | A4 | Coupe | Cabriolet | A6 | A8
VW V6 engine codes : ABC | AAN

VAG V8 Camshaft Alignment Tool
Designed to align the camshafts at TDC position
when adjusting and assembling.
Applicable to VAG V8 5-valve engines.
OEM Code : T40005

VAG Camshaft Alignment Set
Specially designed to set the Camshaft in the correct position for servicing.
Audi - A4 / A6 / A8 / A11 ( 97 - 04 )
VW - Passat ( 98 - 04 )

VAG Camshaft Drive Belt Sprocket Puller
For removing the camshaft sprockets
on a variety of VW and Audi camshafts.
Includes 17mm and 23mm pulling arms.
OEM Code : T40001

VAG Camshaft Holding / Alignment Tool Kit
for Audi A4 | A6 | A8 - V6 3.0 Petrol Engines
With Camshaft Locking Tool
Crankshaft Retainer Tool
Tensioner Pulley Wrench
Used for timing belt replacement and engine repair.

Engine codes : ASN | AVK | BBJ

OEM Codes : 3387 | T40011 | T40026 | T40028 | T40030

VAG Crankshaft Locking Pin - M14 x 1.5
for locking the crankshaft in TDC position
while Replacing the timing belt on
Audi A6 2005 models with 6 cylinder 2.4 / 3.2 FSI engines
OEM Code : T40069

VAG Crankshaft Turning Adaptor
22mm Square with 12mm Rotating Pivot Pin
Dual Drive : 1/2in.Dr plus 24mm Hex
Used for turning the crankshaft pulley.
Applicable to : 2.4 | 3.2 | 4.2 FSI Engines.
OEM Code : T40058

VAG Crankshaft Locking Tool Set
Suitable for VW Touareg 2003 >
Phaeton 2003 > with 10 cylinder Diesel Engines.
For locking crankshaft when adjusting engine timing.
Adjusting bolts for mounting the engine control module

OEM Codes : T10195 | T10200

VAG Crankshaft Seal Flange Remover and Installer
for 1.4 and 1.6 - 16 Valve VAG engines
fitted to Audi / Skoda / Fiat and VW vehicles
Specific tool vital to ensure the correct alignment
of the main seal house crankshaft sensor.
The Seal housing carries the crankshaft sensor mounting.
OEM Code : T10017

VAG Crankshaft Seal Flange Installation Tool
Designed to renew the crankshaft oil seal on Audi / VW vehicles
Applicable to 16V / 20V - 1.9 / 2.0 Diesel Engines since 2006.
For 4 Valve Diesel engines with integrated sender wheel.
Audi A3 4-cyl. VW Golf / Touran
OEM Code : T10134

VAG Crankshaft Oil Seal Tool
Designed for VW 2.5 TDI | 2.5 Blue TDI Engines.
The flywheel end oil seal is integral with the oil seal housing
and speed sender and is supplied with a new timing ring.
If the oil seal is faulty then the whole assembly must be renewed.
Suitable for VW Crafter 2.5L / 2006 - 2013
Engine Codes : BJJ | BJK | BJL | BJM | CEBA | CEBB | CECA | CECB
OEM Code : T50010

VAG Tensioner Wrench
Multi-position timing belt tension wrench for
Volkswagen | Audi | Skoda | Seat vehicles.
5 variable positions for extra easy use.
Suitable for both petrol and diesel engines.

VAG Timing Tool Set
For Audi / Seat / Skoda / VW
1.9 / 2.0 TDI pump / nozzle
1.9 TDI / conventional
2.5 V6 TDI | 3.3 V8 TDI Diesel Engines
1.2 3-cylinder and 1.4 | 1.6 Petrol Engines
With Camshaft Locking Tools
Injection Locking Tools
Crankshaft Locking Tools
and Injection Nozzle Wrench : 22mm.

VAG Timing Tool Set
For 2.0 FSI Petrol Engines since 2003.
Found on - Audi A3 | VW Golf and Touran models
Includes :
Pin Wrench
Alignment Pin
Locking Pins
Chain Tensioner / Tensioning Screw
Camshaft Locking Tool

VAG Camshaft Locking Tool
W8 and W12
For aligning the camshafts on
W8 - V6 R32 3.2L
and W12 6.0L
OEM Codes : T10068 | T10068A

VAG Crankshaft Rotation Tool
for VAG 5 Cylinder Engines
Necessary for crankshaft adjustment and as use as a lever.
Suitable for all 5 cylinder VW diesel engines -
VW touareg as of 2003 and transporter as of 2004
Fixing screw allows easy mounting on crankshaft.
OEM Code : T10225

VAG Water Pump Removal Kit
This kit is essential for the removal of the water pump
and the alignment of the engine at top dead centre
on Transporter and Touareg vehicles
For 2.5L 5-cylinder TDI engines.

VAG Timing Tool Set
For 2.5 / 4.9D / TDI PD Touareg and Phaeton Models
Suitable for VW T5 as of 2004
Touareg and Phaeton as of 2003 with 5 and 10 cylinder engines.
Engine Codes : AXD | AXE | BAC | BLJ | BLK | BNZ | BPC | BPD | BPE
Camshaft Locking Tools and Clamp for 5 and 10 cylinder engines.
Special Socket for rotating the crankshaft of 5 cylinder engines.
Crankshaft Locking Wrench for 5 cylinder engines.
Tensioner Wrench.

VAG Timing Tool Set
For checking and setting camshaft timing on
Audi V6 | V8 and VI0 Engines with Chain Drive
Camshaft Locking Tool
Crankshaft Turning Adaptor
Crankshaft Locking Pin
Chain Tensioning Locking Pin

VAG Timing Tool Set
For locking the camshaft when adjusting timing
on Audi / Bentley / VW vehicles.
Applicable to : 8 cylinder 4.0 TFSI engines
A6 - 2011 | A8 - 2010
OEM Code : T40264

VAG Diesel Engine Setting / Locking Kit
Cranshaft Locking Tool.
Camshaft / Tensioner Locking Pins.
For Engines with Hydraulic Belt Tensioners in -
VAG : 1.2D | 1.4D | 1.9D | 2.0TDi PD Belt Drive Engines.
Suitable for Audi / Seat / Skoda / VW and some Ford vehicles.
OEM Codes : 3359 | MP1-301 | T10008 | T10050 | T20102

VAG Timing Tools
For Audi / VW 2.5 V6 TDi Engines
with Crankshaft Locking Pin
and Camshaft Locking Plates.
VW Passat 2.5 V6 TDI
Audi A4 / A6 / A8 2.5 V6 TDI
Skoda Superb 2.5 V6 TDI

VAG Crankshaft Locking Tools
for 1.4 | 1.6 |1.9 | 2.0 TDI Engines / 2002 - 2008
Allows checking and adjustment of the engine timing
during tooth belt and camshaft replacement.
Crankshaft Locking Tool
Pump Wheel / Camshaft Locking Tool
Crankshaft Locking Tool
Locking Pin - 4mm
Locking Pin for V-belts

VAG 1.9 TDi Timing Tool
Applicable to
Seat : Cordoba / Ibiza / Inca / Leon / Toledo - 99 - 06
Volkswagen : Bora / Golf / New Beetle
OEM Codes : T20038 | T10098

VAG Timing Tools
for VW 1.2L Engines 8155-1
Also replacement parts for CT3146 Timing Set
OEM Code : T10123

VAG Timing Tool Set
Setting and Locking Kit
Tools for locking top dead centre and
setting tools to re-check correct alignment
on Petrol and Diesel Engine Vehicles
Applicable to : PSA / VAG and Volvo.

VAG Timing Tool Set
Diesel Engine Timing Belt replacement
Camshaft and Crankshaft Locking Tools
Camshaft Wheel Puller | Balance Shaft Fixing Tool
Suitable for a wide range of VW Group vehicles.

VAG Timing Tool Set
For 1.6 | 2.0 TDi CR Diesel Engines from 2012 onwards.
Cambelt Tensioner Locking Tool 2.5 mm
Hex Keys : 6mm | 8mm
2 Fuel Pump Locking and Camshaft Alignment Pins
Auxiliary Drive Tensioner Pin
Camshaft / Crankshaft Timing Pin
Crankshaft Timing Tool and Locking Pin
Sprocket Holding Tool for High Pressure Fuel Pump.

VAG Timing Tool Set
Diesel Engine Setting / Locking Kit
for Belt Drive 2.4 / 2.5D SDI / TDI / TDICR engines.
Crankshaft Pulley Holding Tool
Camshaft Setting Plate
Injection Pump Locking Pin
Crankshaft Locking Pin
Tensioner Adjuster
VW Crofter / IT and Transporter

VAG Timing Tool Set
For use on Audi / VW 3.0 TDi diesel engines.
Applicable to :
Audi A4 | A5 | A6 | A7 | A8 | Q5 | Q7 - 2014 onwards
VW Amorak - 2014 onwards.

VAG Timing Tool Set
For Timing Belt replacement
on 2.7 / 3.0 V6 TDi PD
Common Rail Diesel Engines
With Camshaft Wheel Puller
Camshaft and Crankshaft Locking Tools
Suitable for a wide range of Audi / VW vehicles

VAG Timing Tool Set
for 2.7 | 3.0 | 4.0 | 4.2 Diesel Engines
Crankshaft Adjusters - Gearbox End / Pulley End
Cam & Crankshaft Locking / Retaining Pins
Camshaft Sprocket Adjuster
HP Pump Sprocket Remover
Balance Shaft Locking Pin

VAG Timing Tool Set
for 1.2 / 1.4 / 1.9 / 2.0 / 2.7 / 3.0 Diesel Engines
also 1.9 TDI PD Engines
Allows the adjustment of phase timing
and cylinder head assembly / installation.
Camshaft Alignment / Locking Pins and Tools
Crankshaft Adapters / Locking Pins / Tools
Injection Pump Locking Pins
Tensioner / Pulley Locking Pins

VAG Timing Tool Set
for VW Lupo / Polo etc.
For 1.2 Litre 3 Cylinder Engines from 2002 Onwards.
For Volkswagen | Seat | Skoda vehicles
OEM Codes : T10123 | T10121 | T10120