Universal Valve Spring Compressor
Complete upper engine service kit
enables in-situ removal and replacement of
valve springs / guides and seals
Suitable for 8 | 16 and 24 valve engines.
With Collet Tool | Valve Stem Seal Pliers
and Valve stem seal replacement kit

Universal Valve Spring Installation Kit
Ideal for use in restricted space conditions.
Specially designed to remove / install the valve springs
and oil seals in most vehicles by using pressurized air to close the valve ports.
Suitable for BMW / Ford / Mercedes / Mitsubishi / Toyota and VAG vehicles.

Air Valve Spring Compressor Set
Prevents the engine valve from falling into the body
due to counter pressure caused by air delivered via a spark plug-thread.
Suitable for spark plug threads M14 x 1.25 and M18 x 1.5
Extensive accessories.
Operates with 10mm / 3/8in. drive T-handle or Ratchet

PSA Valve Spring Tension Tool
for Citroen / Peugeot Vehicles
Suitable for 1.0 | 1.1 | 1.4 | 1.6 Petrol Engines in -
Citroen Xsara and Berlingo
Peugeot 106 | 205 | 206 | 306 | 307 | 405

Valve Adjustment Socket for Mercedes-Benz
Size : 17mm x 1/2in.Dr
Special Socket for Mercedes-Benz Valve Adjustment.
Applicable to : M100 | 110 | 114 | 115 | 123 | 130 models.

11pc Valve Seat Cutter Set
with T-Handle
5 Milling Heads : 32.5 | 35 | 37.5 | 40 | 42.5mm
5 Stem Guides : 6.5 | 7 | 7.5 | 8 | 8.5mm
NOT suitable for hardened valve seats.
Ideal for Vintage Cars and Motorcycles.

2 Cylinder Head Stands
Support stands that locate into the cylinder head via the stud holes
Provides the clearance between head and workbench when reaming valve guides.

Guide Rail Pin Puller - Mercedes Benz / BMW
For Removing Stubborn Pins from Cylinder Heads
Ideal for those tight problem areas.
85mm puller incorporates a thrust bearing to ease the pulling action.
Screws : 2 - M8 x 1.25 | 29mm deep
2 - M8 x 1.25 / M6 x 1.0 | 29mm deep
2 - M8 x 1.25 / M5 x 0.8 | 29mm deep

VAG / Porsche Diesel Head Rebuild Jig
for fitting camshafts into cylinder heads during head rebuilds.
Applicable to VAG and Porsche vehicles with diesel engines
Now in a EVA tray.

600mm Precision Straight Edge
Engineered for checking distortion in cylinder heads / engine blocks.
Suitable for us on engines up to 6 cylinders.
Also used in conjunction with feeler gauges.

Flexible Engine Cylinder Hone
Range : 68 - 70mm / 120 Grit
Shaft diameter : 6.5mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 68 - 70mm / 180 Grit
Shaft diameter : 6.5mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 75 - 77mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 75 - 77mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 81 - 83mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 81 - 83mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 87 - 89mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 87 - 89mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 94 - 96mm / 120 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

Flexible Engine Cylinder Hone
Range : 94 - 96mm / 180 Grit
Shaft diameter : 7.8mm
Max. drive speed : 300rpm
For cleaning and deglazing the walls of cylinders.
Also ideal for surface finishing bores
that have been honed to size with a rigid hone.

2pc Brake Caliper Seal Groove Cleaner Set
200mm Long with different heads
For removing dirt and debris from seal ring grooves.

2pc Scraper Set
with Black electroplated shafts and Tungsten Carbide Tips
Blade Width : 16mm | 32mm. Handle : 150mm
For use on brake Calipers and back plate sliding faces,
exhaust manifolds, cylinder heads, gaskets
or any area to remove corrosion and debris.
Double edged tungsten carbide tipped blades,
remain very sharp and are precision ground.

VAG Water Pump Removal Kit
This kit is essential for the removal of the water pump
and the alignment of the engine at top dead centre
on Transporter and Touareg vehicles
For 2.5L 5-cylinder TDI engines.

Block Tester Kit
With Block Tester Powder
Detects exhaust gasses in radiators
and so checks for gasket damage
or cracked and warped cylinders.
Works with Petrol engines.
Not recommended for Diesel vehicles

8pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Block Tester Powder and Bottle
For use with Block Tester Kit CT1133 and CT3923

Leak Detector Set with 3W UV LED Light
Allows detection of leaks in Air Condition Systems also
Engines and Gearboxes in conjunction with fluorescent additives.
Includes 3W LED UV flashlight.
1500mAh Rechargeable battery with charger
Protective glasses with special UV filter
Hose / Syringe and Adaptor.

12V Smoke Leak Detector
For detecting leaks in pipe systems on cars and motorcycles
such as fuel pipes / air intakes and the radiator.
Smoke output value : 1 - 6 L/min
Output Pressure : 10 - 18psi
With Built-in air pump / Controllable flow value
Test Oil Capacity : 100ml
Supplied with all accessories needed.

Brake Cylinder Hone
20 - 64mm | 3/4 to 2-1/2in. diameter
Flexible shaft for ease of use and self centring.

Replacement Abrasive Stones
30mm | 1-1/8in. | 220 Grit
for CT2756 Cylinder Hone

Cylinder Hone
with 75mm / 3in. Abrasive Stones
Range : 51 - 177mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

Replacement Abrasive Stones
75mm / 3in.
for CT2757 Cylinder Hone

Cylinder Hone
with 100mm / 4in. Abrasive Stones
Range : 50 - 180mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

Replacement Abrasive Stones
100mm | 4in. | 220 Grit
for CT2757 Cylinder Hone

32mm Rigid Offset Scraper

3pc Scraper Set
Sizes : 10mm x 270mm | 25mm x 220 and 310mm
Ideal for De-carbonising cylinder heads / pistons and other engine parts.
Chrome-Vanadium