Section 5.5

Carburettors / Fuel Injectors & Fuel Pumps

VAG Fuel Injector Service Kit

CT5669

Fuel Injector Service Kit - VAG

15pc VAG Fuel Injector Service Kit
Suitable for VW / Audi / Seat / Skoda FSI injectors
with Direct Injection or Pump-Injector engines.
Slide hammer / Puller / Puller Claw for dismantling FSI injectors
Cone an Calibration tools for mounting the combustion chamber rings.
Built-in pin for mounting the FSI injectors
Extractor for dismantling pump-injector units

VAG Fuel Injector Service Kit
t Click picture for more information
Diesel Injector Extractor Set

CT0536

Fuel Injector Master Kit

Diesel Injector Master Kit
Suitable for the removal of Bosch / Delphi /
Denso / Siemens and Pumpe Duse diesel injectors.
1.3kg Slide Hammer with 150mm Shaft.
4kg Slide Hammer with 400mm Shaft and Handle.
With various Male and Female Adaptors.
Pump Duse Injectors Adaptors.
Injector Sockets - 25 | 27 | 29 | 30mm

Diesel Injector Extractor Set
t Click picture for more information
Diesel Injector Extractor Set

CT5924

Fuel Injection Puller Set - Air Operated

Pneumatic Injector Removal Tool Set
Air Pressure : 0.5 - 0.8bar provides impact
to disassemble particular tight fuel injectors
with a universal 21 piece adaptor set that cover
Bosch / Delphi / Denso / Siemens CR injectors
which have solenoid coil or screw connections.
M14 | M16 | M18 | M20 | M22 | M8-C | M8-X | M10

Diesel Injector Extractor Set
t Click picture for more information
Diesel Injector Extractor Set

CT5507

Fuel Injection Puller Set - Air Operated

Master Injector Extractor Kit with 10 Ton Hydraulic Cylinder
Suitable Diesel Fuel Injectors :
Bosch : M17 x 1.0
Delphi : M14 x 1.5 Delphi
Toyota : M16 x 1.0 Toyota
Denso : M20 x 1.0
Siemens : M25 x 1.0 / M27 x 1.0
Can be used in-situ saving time and expense.
Main side and top bars allow for various engine configurations.

Diesel Injector Extractor Set
t Click picture for more information
Fuel Injector Master Service Kit

CT3507

Fuel Injector Master Service Kit

Diesel Injector Extractor Set
With adaptors and Slide Hammers -
1.6kg | 2.7kg | 5.1kg
Pulling Claws with fork opening.
5 slotted 6 point 1/2in.Dr sockets -
25 | 27 | 28 | 29 | 30mm x 100mm
Injector extractor sleeve with shells.
M27 Pulling adaptors.

Fuel Injector Master Service Kit
t Click picture for more information
BMW Fuel Injector Service Kit

CT5754

Fuel Injector Service Kit - BMW

Fuel Injector Removal / Installation Tool Kit
for BMW MINI Petrol Engines B38 / B48
For extracting or fitting plastic bodied petrol injectors
used on some BMW and MINI engines also reducing
the chance of damage to the injectors while removing them.
OEM Codes : 2358417 | 2358022.

BMW Fuel Injector Service Kit
t Click picture for more information
BMW Fuel Injector Service Kit

CT3617

Fuel Injector Service Kit - BMW

BMW Fuel Injector Service Kit
Bosch and Common Rail injectors
mounted on many BMW vehicles.
No need to dismantling the cylinder head.
Blower adaptor to clean the injector seats.
M16 - M17 forcing screw | support feet
Hex wrench to remove solenoids
29mm injector socket with 1/2in.Dr

BMW Fuel Injector Service Kit
t Click picture for more information
BMW Fuel Injector Socket - 29mm

CT3617-1

Fuel Injector Socket - 29mm

29mm Fuel Injector Socket
1/2in.Dr
for BMW Common Rail Injectors
Replacement socket for CT3617

BMW Fuel Injector Socket - 29mm
t Click picture for more information
Hydraulic Upgrade Kit for CT3617

CT5378

Fuel Injector Remover Kit

Diesel Injector Removal Hydraulic Upgrade Kit
Providing 17 Ton Hydraulic force for diesel injector removers allowing
the controlled extraction of very tight fitting or struck injector nozzles.
Can be used in conjunction with CT3617
Hydraulic Cylinder with M16 x 1.5 Nut and Spacer Ring.
Pull Spindles M14 x 1.5 external thread - 240 / 315mm
Pull Spindles M17 x 1.0 internal thread - 240 / 315mm
Pull Spindle M18 x 1.5 internal thread - 250mm
Pull Spindle M25 x 1.0 internal thread - 240mm

Hydraulic Upgrade Kit for CT3617
t Click picture for more information
BMW Fuel Injector Remover

CT5879

Fuel Injector Extractor - BMW

Petrol Injector Extractor Set
For BMW N54 / N63 and Mini N14 / N18
Designed to remove injectors and re-install the Teflon seals.
Includes : Slide-Hammer and Adaptor
70mm Short Bolt | 120mm Long Bolt
Tapered Cone and Small / Medium and Large Diameter Sleeves.

BMW Fuel Injector Remover
t Click picture for more information
BMW Fuel Injector Remover

CT4054

Fuel Injector Remover - BMW

Fuel Injector Service Tool
For the removal and installation of high pressure injectors
with hold down top found in the BMW N20 and N55 series engine.
Coated steel and anodised aluminium
OEM Code : 130320

BMW Fuel Injector Remover
t Click picture for more information
BMW Fuel Injector Remover

CT5876

Fuel Injector Extractor - BMW

Petrol Injector Remover with Slide Hammer
for BMW N43 | N53 | N54 models
Access directly below injector and held by thumbscrew
Suitable for BMW : 1 | 3 | 5 | 6 | 7 series
OEM Code : 130180

BMW Fuel Injector Remover
t Click picture for more information
BMW Fuel Injector Tool Kit

CT5482

Fuel Injector Tool Kit - BMW

BMW Fuel Injector Service Tool Kit
Designed to install and remove high pressure injectors
also injectors with hold down tops found in BMW N series engines.
Applicable to : BMW N20 | N47| N54 | N55 | N57 | N63 models.
OEM reference : 130180 / 130270 / 130320

BMW Fuel Injector Tool Kit
t Click picture for more information
Diesel Injector Puller

CT2101

Fuel Injector Puller

Diesel Injector Puller with Adaptor
Aids Removal of Bosch and Lucas Diesel Injectors
M8 | M12 | M14 Adaptors

Diesel Injector Puller
t Click picture for more information
Ford Petrol Injector Puller

CT6355

Fuel Injector Puller - Ford

Petrol Injector Puller for Ford Vehicles
For removing Bosch GDI Injectors
on all standard Ford EcoBoost petrol engines 1.0 - 3.7 litre capacity.
Extracts petrol injectors easily without damaging the injector or head.
Includes slide hammer and specially designed injector claw.
OEM Code : 310-206

Ford Petrol Injector Puller
t Click picture for more information
Fuel Injector Puller Set

CT6295

Fuel Injector Puller Set

Fuel Injector Puller Set
for Alfa Romeo / Fiat / Ford / Iveco / Opel / PSA / Suzuki
1.3 / 1.6 / 1.9 / 2.0 - 16 Valve Engines - Also 2.3 and 3.0 models
Specifically designed for the removal of extremely seized injectors.
With the application-specific extractor -
the injectors can be removed either hydraulically or mechanically.

Fuel Injector Puller Set
t Click picture for more information
Fuel Injector Removal Kit

CT5386

Fuel Injector Removal Kit - Kia / Hyundai

Kia / Hyundai Injector Remover Kit
For removing injectors from most Korean vehicles -

Kia : Carnival | Rio | Careens | Cerato | Optima
Picanto | Sorrento | Sportage | Grand Carnival.

Hyundai : Starex | Lavita | Matrix | Trajet | Terracan
Santa FE / SM | Libero | Avante XD | Tucson |
Grandeur XD Getz | NF Sonata | Accent / 06

Fuel Injector Removal Kit
t Click picture for more information
Mercedes Diesel Fuel Injector Puller

CT3413

Fuel Injector Puller - Mercedes

Diesel Fuel Injector Puller
with Injector Cap removal socket and Security Hex Key
Specially designed for the removal of stubborn diesel injectors on Mercedes CDI engines.
Designed to remove the injector without damaging the cam cover.
For C-Class / E-Class and Sprinter Vehicles

Mercedes Diesel Fuel Injector Puller
t Click picture for more information
Mercedes Fuel Injector Puller

CT4987

Fuel Injector Puller Set - Mercedes

4pc Injector Puller Set
for Mercedes CDI Engines
10mm Hex Bit with integral 1/2in.Dr socket
29mm Slotted Injector Socket with 1/2in.Dr or use with 22mm spanner
Pulling spindle : 34mm dia with 20mm Slot
Protection Rings
Ideal for removal and installing tightly fit common rail injectors
as found on Mercedes CDI 611 / 612 and 613 engines.

Mercedes Fuel Injector Puller
t Click picture for more information
Mercedes Diesel Injector Puller

CT4071

Fuel Injector Puller Set - Mercedes

6pc Injector Puller Set
for Mercedes CDI engines
For removing common rail injectors
without having to disassemble cylinder head.
Applicable to Mercedes-Benz
CDI engines 611 | 612 | 613 etc.
Injection puller with impact hammer.

Mercedes Diesel Injector Puller
t Click picture for more information
Diesel Injector Puller

CT3583

Fuel Injector Puller - PSA

Diesel Injector Puller
For Citroen / Peugeot 2.0 / 2.2HD1 injectors.
With Pulling Bridge and 3 Bridge Legs
Injector Sockets : 25mm | 29mm Diameter
Injector Force Screw Threads :
17mm Male x 1mm Pitch
25mm x 1mm Pitch
Security Hex Key : 10mm

Diesel Injector Puller
t Click picture for more information
Diesel Injector Puller

CT5894

Fuel Injector Puller - Renault

Injector Removal Extraction Tool Kit
Designed to remove the injectors on Renault Trafic 2.0 DCI M9R Engines.
Also used in Nissan vehicles and Vauxhall Vivaro.
Includes 2 Force Screws :
M14 x 1.5mm Female Force Screw for Piezo Injector
M17 x 1.0mm Male for Solenoid type Injectors.

Diesel Injector Puller
t Click picture for more information
Injection Puller Set

CT3151

Fuel Injection Puller Set - VAG

7pc Injection Puller Set - VAG TDI
For quick and precise extraction of Injection Nozzles from Diesel Engines
Suitable for Audi - VW diesel vehicles - SDI / TDI / PD

Injection Puller Set
t Click picture for more information
Fuel Injector Nozzle Puller - Volvo

CT5436

Fuel Injector Puller - Volvo

Injector Nozzle Puller - Volvo HGV
Designed to aid extraction of the unit-injectors from Volvo HGV engines.
Ideal where the unit pump has overheated and stuck in the cylinder head.
Applicable to :
Volvo trucks - FM12 | FM440 | FH500
Volvo Penta marine engines - D9 | D12 | D16.
Includes slide hammer and
Puller Attachment Clamp to keep the assembly in place.

Fuel Injector Nozzle Puller - Volvo
t Click picture for more information
Diesel Injector Puller Set

CA5020024

Fuel Injector Puller Set - 14pc

Diesel Injector Puller Set
With Special 1/2in.Dr Hex Bits
Suitable for the fast and reliable removal of
Bosch | Delphi | Deso and Siemens Diesel Injectors.

Diesel Injector Puller Set
t Click picture for more information
BMW Fuel Pump Removal Tool

CT5552

Fuel Pump Removal Tool - BMW

Fuel Pump Removal Tool
for BMW X1 | X3 N47 2.0 Diesel Engines
Applicable to :
1 Series : E81 | 82 | 87 | 88
3 Series : E90 | 91 | 92 | 93
5 Series : E60 | 61
X1 and X3 : E83
and all chain driven engines.
OEM Code : 118740

BMW Fuel Pump Removal Tool
t Click picture for more information
BMW Fuel Injector Pump Service Tool

CT4849

Fuel Pump Service Tool - BMW

BMW Injection Pump Wheel Assembly Tool
For Holding the sprocket during assembly of the injection pump.
Suitable for BMW engines : M47 | M47T2 | M47TU | M57 | M57TU

BMW Fuel Injector Pump Service Tool
t Click picture for more information
Mercedes Injection Pump Socket

CT4026

Fuel Pump Socket

Mercedes Diesel Fuel Injection Pump Socket
33 point Spline | 1/2in.Dr | 56mm Long
For injection pumps on Mercedes-Benz
601 | 602 | 603 | 605 | 606 | 615 | 616 | 617
Also fits many early 250 and 300 models
with in-line fuel pumps.

Mercedes Injection Pump Socket
t Click picture for more information
Mercedes Diesel Pump Locking Pin

CT4396

Fuel Pump Locking Pin

Mercedes Diesel Pump Locking Pin
For locking Bosch inline Diesel pumps in mounting position.
Applicable to Mercedes - 200 / 250 / 300D - TD
OEM Code : 601589052 00

Mercedes Diesel Pump Locking Pin
t Click picture for more information
Ford Fuel Pump Sprocket Puller

CT6363

Fuel Pump Sprocket Puller - Ford

Fuel Pump Sprocket Puller
for Ford Transit 2.2L TDCi
From 2011 fuel pump sprockets no longer have threaded holes fitted in them
this tool allows the pump removal without removing the timing chain.
Applicable to : Ford Transit from 2011 with 2.2L TDCi Puma engine.
Also Land Rover Defender 2.2L TD4 / 2001 - 2015
OEM Codes : 303-249 | 303-249/01

Ford Fuel Pump Sprocket Puller
t Click picture for more information
Ford Fuel Pump Water Drain Valve Plugs

CT6235

Fuel Pump Water Drain Valve Plugs

5pc Fuel Pump Water Drain Valve Plugs
For Ford 6.7 | 6.7L Diesel HFCM
Ford Truck / Pickup 2017-2022
F250 / F350 / F450 / F550 Super Duty 6.7L V8 Diesel Engines.
Easy Installation.
OEM Code : HC3Z-9J305-A

Ford Fuel Pump Water Drain Valve Plugs
t Click picture for more information
Fuel Pump Sprocket Socket

CT5551

Fuel Pump Sprocket Socket - Hyundai / Kia

Fuel Injection Pump Sprocket Tool
For high pressure fuel pump sprockets fitted to
Hyundai and Kia 2.0 | 2.2 CRDi diesel engines.
Allows the fuel pump sprocket to be pulled from the pump.
OEM Code : 09331-1M100.

Fuel Pump Sprocket Socket
t Click picture for more information
Fuel Pump Sprocket Socket

CT5469

Fuel Pump Sprocket Socket - VAG

VAG Diesel Pump Sprocket Puller
15mm Hex Drive with 24mm Hex Retainer.
For removing the high pressure fuel pump on 1.4 | 1.6 | 2.0L TDi engines.
Applicable to VW and SEAT vehicles from 2008 - 2013.
OEM Code : T10489.

Fuel Pump Sprocket Socket
t Click picture for more information
Diesel Fuel Injection Pump Puller  Set

CT3566

Fuel Pump Puller Set

CDI Diesel Fuel Injection Pump Puller
Small puller body to fit transverse engines on
Vauxhall / Opel and Land Rover Free Lander and Rover 75 models
with TD4 and M47 2.0 engines where space is at a premium.

Diesel Fuel Injection Pump Puller  Set
t Click picture for more information
Injection Pump Socket Set

CT4129

Fuel Injector Pump Socket Set - 2pc

2pc Injection Pump Socket Set
3 Point - 7 and 12.6mm
For the triangular screw on the quantity adjuster top cover.
Suitable for Bosch common rail
and TDi injection Pumps

Injection Pump Socket Set
t Click picture for more information
Diesel Fuel Pump Timing Set

CT3892

Fuel Pump Timing Set

Diesel Injector Pump Timing Set
For the accurate adjustment of different fuel injection pumps i.e
Bosch | VE | Kikki | Lucas | CAV-Roto | Nippondenso

Diesel Fuel Pump Timing Set
t Click picture for more information
Diesel Fuel Pump Timing Set

CT4077

Fuel Pump Timing Set - 7pc

7pc Diesel Fuel Injection Pump Timing Set
Audi | Ford | Seat | Skoda | Volkswagen
with Dial Indicator Gauge
Dial Button Extension
Dial Indicator Adapter
Injection pump locking pin / One-piece impeller
Injection pump locking pin / Two-piece impeller

Diesel Fuel Pump Timing Set
t Click picture for more information
TDI Diesel Pump Socket Set

CT4027

Fuel Pump Socket Set - 4pc

4pc 3/8 and 1/2in.Dr Socket Set
for Specific Triangular Nut Profile
Sizes : 6.5 | 7.5 | 13 | 26mm
Special sockets for triangular head bolts
necessary for TDI diesel pump internal repairs.
Chrome Molybdenum

TDI Diesel Pump Socket Set
t Click picture for more information
Fuel Injector Gasket Puller

CT2790

Fuel Injector Gasket Puller

Fuel Injector Gasket Puller
For the removal of the copper ring gasket on fuel injectors
230mm Long
Suitable for most Common Rail Diesel Engines

Fuel Injector Gasket Puller
t Click picture for more information
Fuel Injector Seal Puller

CT4640

Fuel Injector Gasket Puller

Fuel Injector Gasket / Seal Puller
For the extraction of fuel injector copper washers.
Slim shaft with threaded conical tip and slide hammer.

Fuel Injector Seal Puller
t Click picture for more information
BMW Fuel Injector Gasket Removal Tool

CT6356

Fuel Injector Gasket Puller - BMW

370mm Heavy Duty Injector Gasket Puller
with 840g Slide Hammer
For extracting burnt in copper seal washers from the injector shaft.
4 - 16mm Internal Diameter Seal Rings.
Helps to avoid damages to the cylinder heads.
Applicable to : BMW / Mercedes-Benz / PSA models.

BMW Fuel Injector Gasket Removal Tool
t Click picture for more information
Fuel Injector Cleaner & Fuel System Tester

CT4725

Fuel Injector Cleaner and Fuel System Tester

Injector Cleaner and Tester
plus Petrol Fuel System Tester
Multi-Function Non-Dismantle Injector Throttle and Fuel System Kit
with a range of adapters to cover most makes and models of vehicles.
Provides high and low pressure cleaning of combustion chamber fuel system
plus throttle valve and fuel nozzle cleaning ability.

Fuel Injector Cleaner & Fuel System Tester
t Click picture for more information
Diesel Injector Seat Cutter Set

CT3145

Diesel Injector Seat Cutter Set - 7pc

7pc Diesel Injector Seat Cutter Set
High quality material - skd11 provide easy clean work.
Various cutters are available for nearly all diesel cars.

Diesel Injector Seat Cutter Set
t Click picture for more information
Diesel Injector Seat Cutter Set

CT4085

Diesel Injector Seat Cutter Set - 17pc

17pc Diesel Injector Seat Cleaning Set
Reamer Sizes : 14 | 15 | 17 | 19mm
For efficient cleaning of injector ports and seating
before changing or when reconditioning diesel injectors.
Helps to avoid blow-back due to poorly seated injectors.
Suitable for most vehicles
With Reamers for a wide range of vehicles

Diesel Injector Seat Cutter Set
t Click picture for more information
Diesel Injector Seat Cleaning Set

CT4528

Diesel Injector Seat Cleaning Set

Universal Injector Seat Cleaning Set
For cleaning diesel injector seats prior to fitting new injectors.
Silicone Nylon brushes 15 and 20mm.
Steel wire brushes 18 | 22 | 25mm.
Steel wire injector nozzle port cleaner.
224mm long Bit

Diesel Injector Seat Cleaning Set
t Click picture for more information
Diesel Injector Seat Cleaning Set

CT4060

Diesel Injector Seat Cleaning Set

Diesel Injector Seat Cleaning Set
For efficient cleaning of injector ports and seating
before changing or when reconditioning diesel injectors.
Helps to avoid blow-back due to poorly seated injectors.
Suitable for most vehicles
With Cleaning Brushes
Injector Seat Cutters and Guide
Seal Puller

Diesel Injector Seat Cleaning Set
t Click picture for more information
Diesel Injector Seat Cleaning Set

CT6416

Diesel Injector Seat & Port Cleaning Set

Injector Seat and Shaft Cleaning Kit
Used to remove rust / carbon and other debris
and efficient cleaning of injector seats and shafts on diesel engines.
Suitable for a wide range of vehicles and engines.
With Wire Brushes : 25.1 | 29.5 | 30.2 | 34.9mm
2 Stage Wire Brushes : 12.1 | 19.1 | 25.4mm
Bore Wire Brushes : 8 | 10 | 12 | 15 | 17 | 19mm
Brush Handle and Rigid Extension with quick couplers
Flexible Extension with fixing screw - 1/4in. Hex Drive
Cleaning Swab Assortment : 5 - 16mm
Used to remove rust / carbon and other debris.

Diesel Injector Seat Cleaning Set
t Click picture for more information
Diesel Injector Bore / Seat Cleaning Set

CT5908

Diesel Injector Bore / Sleeve Cleaning Set

3pc Diesel Injector Bore & Sleeve Cleaning Kit
Long Spiral Tube Brush :
290mm Long with 150mm bristles up to 35mm diameter
Spiral Tube Brush :
275mm Long with 80mm bristles up to 35mm diameter
Flat Bottom Brush :
260mm Long with 50mm bristles / 17mm diameter
With durable galvanized shaft and polypropylene handles

Diesel Injector Bore / Seat Cleaning Set
t Click picture for more information
Automotive Wire Brush Set

CT5909

Automotive Wire Brush Set

6pc Wire Brush Set
153mm Stainless Steel Brushes -
Diameter : 13 | 19 | 25 | 31 | 41 | 50mm.
Suitable for cleaning and removing rust and debris
from the internal surfaces of engine components -
Pipes / Tubes and Bores etc.

Automotive Wire Brush Set
t Click picture for more information
Diesel Injector Repair Kit

CT4884

Diesel Injector Repair Kit

8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.

Diesel Injector Repair Kit
t Click picture for more information

Product Search

Search Icon
Section 1 Icon Section 2 Icon Section 3 Icon Section 4 Icon Section 5 Icon Section 6 Icon Section 7 Icon Section 8 Icon Section 9 Icon Section 10 Icon

Cannon Tools Limited   •  20 Station Road,  Rowley Regis,  West Midlands,  B65 0JU,  United Kingdom

 T +44 (0) 121 561 6760