6pc Brake Pipe Flaring Kit
With Quick Release Dies
Brake Flaring Tool Suitable For 3/16in. or 4.75mm Diameter Tubing
Secure Clamping with Quick Release.

7pc Flaring Tool Set
For Single or Double Flaring Aluminium and copper tubing
Adaptors for 3/16 | 1/4 | 5/16 | 3/8 | 1/2in. Tube or 4.8 - 12.7mm

10pc Pipe Flaring Kit
Steel Compressor Yoke
Flaring Tool
Flaring Dies - 5. 6. 8. 10. 12. 14. 16mm

Professional Brake Line Flaring Tool Kit
For flaring brake pipes and hydraulic tubing.
Can be used on copper / brass / aluminium and steel pipes
For coated and non-coated pipes.
For inside and outside flaring.
Includes 4 pairs of pressure pieces :
4.75mm | 6.35mm | 8mm | 9.5mm
3/16in. | 1/4in. | 5/16in. | 3/8in.

8pc Brake Tool Set
Spring Compressor
Brake Spring Installer
Spring Removal Tool
Brake Retaining Spring Tool
Brake Spring Pliers
2 Brake Adjustment Spoons
Mini Adjustment Spoon
Popular brake tools for servicing brakes on most vehicles.

15pc Comprehensive Brake Service Tool Set
Brake Line Flare Nut Wrench
Brake Spring Pliers and Spring Tool
Pound Thru Screwdriver and Hex Socket Bits
Brake Calliper File and Brushes
Brake Cable Hook
Assembly Tool

8pc Brake Gauge Set
Colour coded for ease of use
Green for Go : 8mm | 10mm | 12mm
Yellow for Caution : 4mm | 5mm | 6mm
Red for stop and replace : 2mm | 3mm

100mm Digital Brake Disc and Drum Calliper
For measuring external brake disc thickness and internal small drums.
Easy Read Digital LCD Display - 11mm high characters.
Metric or Imperial read-out with Hold function.
Range : 0 - 100mm / 0 - 4in.
Resolution : 0.01mm / 0.0005in.
Battery : SR44-1.5V - supplied.

150mm Digital Brake Disc and Drum Calliper
Measures external brake disc and internal small drums
LCD display with 11mm high figures for easy reading
Metric or Imperial read-out with Hold function
Supplied with calibration certificate and storage case
Range : 0 - 150mm / 0 - 6in.
Resolution : 0.01mm / 0.0005in.
Battery : 1.5V SR44 - supplied

3pc Brake Disc Run Out Kit
Allows the DTi gauge to be mounted in almost any position
against the brake disc to measure disc warp.
DTi Gauge accurate to 0.01mm / total deflection 10mm.
The Locking pliers allow fixing to suspension bracket or component part
Segmented Steel Mounting Post can be bent and locked into position.
Universal - measures brake disc drive flange or any rotating component run-out.
Can be used on motorcycles.

Dial Test Indicator
0 - 10mm Dial in 0.01mm increments.
Magnetic base with fine adjustment.
Magnet has a 60kg pull.
On / Off Switch for easy positioning.
Used to check variations in machined parts.
Ideal for checking run-out

BPW Brake Linkage Adjuster Extractor
Substantial Tool for drawing off firmly sitting BPW brake linkage adjusters.
Suitable for older and automatic linkage adjusters.
Use with 32mm wrench.
Spindle size : M22 x 1.5 x 90mm

Universal Hub / Brake Drum Puller
Suitable for removing 4-stud vehicle wheel hubs.
Bolt centres : 100 - 115mm
Overall width : 145mm
Depth : 38mm

Motorcycle Brake Calliper Piston Remover
Range : 18mm - 30mm
Universal

Motorcycle Brake Piston Removal Tool Set
For dismantling motorcycle brakes with sliding Callipers.
Removes frozen Pistons with ease.
Includes 12 universal adaptors - 19 to 30mm.
Will not mark or damage the working part of the Piston.
Suitable for nearly all makes and models

6in. / 150mm Composite Calliper
or Vernier Gauge
Dual scale - Imperial / Metric
Measure Inner / Outer Diameter and Depth

Vernier Calliper Accessory Kit for CT2305
For extending the measurement capabilities of Callipers.
Allows for deeper measurement points
especially inwardly tapered components.
With 2 legs and 6 tips : short / long
Perfect for use on disc brakes.