7mm Hex Key / Hexagonal Wrench
Suitable for Disc Brake Servicing
Gearbox Drain Plugs and Valve Adjustment

2pc Hex Bit Set with 3/8in.Dr Sockets
7mm - 36 mm Long
9mm - 92 mm Long
For BMW and Mercedes Brake Linings on
BMW | Ford | Mazda | Mercedes | VAG

7pc 3/8in.Dr Hex Bit Set
Sizes : 3 | 4 | 5 | 6 | 7 | 8 | 10mm
110mm Long with Ball End
Suitable for Automotive use -
Headlight Alignment.
Cylinder Head Removal.
Brake Servicing
Airbag Release etc

2pc Hex Bit Set - 7mm and 8mm 3/8in.Dr
for brake Caliper removal
Total length : 24mm
Ideal where space is restricted
Applicable to Audi / Mercedes vehicles

4pc Star Bit Set - 3/8in.Dr
Sizes : T40 | T45 | T47 | T50
100mm Deep
Suitable for Cylinder Head Bolts
Brake Caliper Bolts
Accessory Fixings and CV Joint Bolts.

7pc 3/8in.Dr Spline Bit Set
Sizes : M4 | M5 | M6 | M7 | M8 | M9 | M10
110mm Long Suitable for
Gearboxes / Suspension and Back Axles
also Headlight Alignment.
Cylinder Head Removal.
Brake Servicing
Airbag Release etc.

9pc Brake Caliper Service Set
Hex Bits 3/8in.Dr : 1/4 | 3/8in. and 7 | 8 | 10mm
Star Bits 3/8in.Dr : T40 | T45 | T50
Star Bit 1/2in.Dr : T60
with Socket Rail

10pc Socket Set - 1/2in.Dr
For special automotive applications -
With 3 | 6 and 10 Point Sockets and
10mm | 12.5mm | 14mm | 19mm Pentagon Sockets

8mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

9mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

10mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

11mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

12mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

13mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

14mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

15mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

16mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

17mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

18mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

19mm - Ratchet Flare Nut Wrench
with standard Open Jaw
Chrome Vanadium

Special Brake Line Spanner
Dual Size : 10 / 11mm x 180 mm Long
Used for replacing brake pipe.
With flange to hold nut completely and prevent slipping.
Offset to aid access for flush fastener turning.

Special Brake Line Spanner
Dual Size : 12 / 14mm x 180 mm Long
Used for replacing brake pipe.
With flange to hold nut completely and prevent slipping.
Offset to aid access for flush fastener turning.

Special Brake Line Spanner
Dual Size : 14 / 17mm x 180 mm Long
Used for replacing brake pipe.
With flange to hold nut completely and prevent slipping.
Offset to aid access for flush fastener turning.

Flare Nut Spanner
Sizes : 24mm / 32mm

2pc Flare Nut Spanner Set
Sizes : 8 x 10mm | 9 x 11mm
for Thermocouples

6pc Flare Nut Spanner Set - SAE
Sizes : 1/4 | 5/16 | 3/8 | 7/16 | 1/2 9/16 | 5/8 | 11/16 | 3/4 | 13/16 | 7/8 | 1in.
15 degree offset for easy access
Ideal for fuel brake and air conditioning lines

6pc Flare Nut Spanner Set
Sizes : 6 | 8 | 10 | 12 | 13 | 14 | 15 | 17 | 19 | 21 | 22 | 24mm
15 degree offset for easy access
Ideal for fuel brake and air conditioning lines.

7pc Flare Nut Spanner Set
Sizes : 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 19 | 21 | 22 | 24mm
with Wallet
15 degree offset for easy access
Ideal for fuel brake and air conditioning lines.

E18 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

E20 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

E24 Star Slogging Wrench
with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For E-type fixings on commercial brake Calipers
found on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

M24 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

M26 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

8pc Adjustable Hook & Pin Spanner Wrench Set
Jaw Range : 35 - 60 | 60 - 90 | 90 - 120mm
With interchangeable Hooks and Pin Lugs
Suitable for DIN 1804 and DIN 981 bearing nuts
For use on motorcycle suspension slotted retaining rings and
ideal for automotive / industrial / plumbing and hardware applications.
With 2 spare pins.

Accelerator / Brake Pedal Adjuster
Sets engine speed to check emissions.
Ideal for MOT check
Length : 710mm

2pc Brake Caliper Seal Groove Cleaner Set
200mm Long with different heads
For removing dirt and debris from seal ring grooves.

2pc Scraper Set
with Black electroplated shafts and Tungsten Carbide Tips
Blade Width : 16mm | 32mm. Handle : 150mm
For use on brake Calipers and back plate sliding faces,
exhaust manifolds, cylinder heads, gaskets
or any area to remove corrosion and debris.
Double edged tungsten carbide tipped blades,
remain very sharp and are precision ground.

135pc Brake Pipe Nut Set
Short Female Brake Nut : M10 x 1.0
Short Female Brake Nut : 3/8in. UNF
Short Male Brake Nut : M10 x 1.0 x L17mm
Full Thread Male Brake Nut : M10 x 1.0 x L16mm
Long Male Brake Nut : M10 x 1.0 x L20mm
Long Male Brake Nut : 3/8in. UNF x L20mm
For use with 3/16in. Pipe Metric and UNF sizes.

Brake Booster Shaft Release Tool for VAG
For separating the brake serve push rod from the brake pedal.
Applicable to Audi / Seat / Skoda / Volkswagen vehicles
Also Volkswagen Passat / 2015 - 2016 and Phaeton.
OEM Codes : T10159A | T10159B

Brake Booster Shaft Release Tool for VAG
For separating the brake serve push rod from the brake pedal.
Applicable to Audi / Volkswagen Vehicles
Audi A4
VW Bora / 1998 - 2008
VW Beetle etc.
OEM Code : T10006A

Brake Booster Shaft Release Tool for VAG
For separating the brake serve push rod from the brake pedal.
Applicable to Audi Q5 - 2009 and onwards.
OEM Code : T40136.

Brake Booster Shaft Release Tool for VAG
For separating the brake serve push rod from the brake pedal.
Applicable to Porsche Cayenne / VW Touareg - 2003 and onwards.
OEM Code : T10189.

Brake Fluid Tester
For accurately checking the quality of brake fluid.
With 5 LED?s to indicate percentage of water in the brake fluid.
Requires LR03 AAA 1.5V Battery / not included.
Automatic Power Off.

3pc Fluid Lock Set
Size range : 4.2mm - 10mm.
Three anodised aluminium bodies with composite screw.
For Clamping and sealing metal flared pipes on braking systems
also cooling system bypass / fuel pipes and AC pipes etc.
Provides an effective seal to metal brake pipes when the braking system has been opened.
Size range : 4.2mm - 10mm.
Prevents brake fluid loss and contamination of the work area.

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Brake Bleed Catch Bottle Kit
Simple to use.
Everything needed to quickly bleed brakes with no mess.
Plastic bottle collects discharged fluid.
Three separate adapters fit the common bleeder screws.

Brake Bleeder Kit
With 3 Adaptors and Hoses
with Magnetic Pad for securing Bottle while in use

1L Brake Fluid Bleed Bottle
With holding chain and hook.
Variable length bleeding hose.
Bleeding nipple adaptor.

Professional Brake Bleeder
1 litre Capacity
with 1/4in Air Fitting
Air Pressure : 90 - 120psi

Brake Fluid Bleed System
with PCL Air Fitting
Working Pressure : 6 - 12 Bar
Suitable for one-man operation anf clutch systems