134pc Air Conditioning Valve Core Set
Suitable for car air-conditioning replacement and maintenance.
4mm x 18mm R12 valve cores.
4mm x 18mm Tyre valve cores.
5mm x 18mm for VW Jeta.
5mm x 25mm for BMW.
6mm x 22mm R134A valve cores.
6mm x 22mm 6mm low side.
7mm x 20mm for Peugeot / Volvo.
8mm x 22mm long hinge side.

60pc O-Ring Rubber Washer Set
Metric Outer Diameter : 15 - 27mm
Imperial Outer Diameter : 9/16 - 1-1/16in

144pc O-Ring Rubber Washer Set
Various Sizes : 1.8mm to 3.5mm Thick | 14mm to 32mm Diameter

225pc O-Ring Rubber Washer et
Various Sizes : 3 x 1 to 22 x 2mm

419pc O-Ring Rubber Washer Set
for use in Automotive / Plumbing / Hydraulics / Air and Gas Connections

225pc O-Ring Rubber Washer Set
Made for air conditioners etc.
Sizes :
External Diameter : 3.0 - 22.0mm
Internal Diameter : 1.0 - 4.0mm

Air Condition Belt Installation Tool
for BMW N62 / MINI W17
For installation of stretch belts or drive belts without tensioner
Suitable for stretching belts on -
BMW N62 / V8 2004 - 2006
MINI W17 / Diesel
OEM Code : 641040

32mm Fan Clutch Nut Wrench
BMW Water Pump Removal Tool Kit
32mm Fan Clutch Wrench
Double-ended Water Pump Fan Pulley Holder
For removing water pumps on models with
temperature dependent viscosity drive fans.
Removes lock nuts on thermo-Viscous fans.

32mm Fan Hub Wrench for BMW / Ford
270mm Long
For holding the Visco-clutch drive shaft on BMW and Ford vehicles.
Especially slim design with PVC dipped handle
Enables easy access

36mm Fan Hub Wrench for Ford / Opel
270mm Long
For holding the Visco-clutch drive shaft on Ford / GM / Opel vehicles.
Especially slim design with PVC dipped handle
Enables easy access

41mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

46mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

2pc Viscous Fan Spanner
with Fan Hub Holding Tool

10pc Fan Clutch Wrench Set
With Fan Pulley Holding Tools
Fan Clutch / Nut / Hub Wrenches
Range from 37mm to 83mm
Range from 1-7/16 to 3-1/4in.

Pneumatic Fan Clutch Wrench Set
for use with Air Tools
Wrench Sizes : 32 | 36 | 40 | 47 and 7/8 | 1-7/8 | 2in.
For removing and installing the fan clutch
when repairing the water pump or fan clutch.
Compatible with Ford / GM / Chrysler and Jeep vehicles.
With Carry Bag.

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Applications : Ford vehicles 2010 - 2015
C-Max / B-Max / Ecosport / Edge / Fiesta / Focus
Galaxy / Kuga / S-Max / Transit Courier
OEM Code : 412-134

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley.
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles 2010 - 2017
C-Max / Focus / Kuga / Transit Connect / Courier / Ka / Fiesta.
OEM Code : 412-154

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2012 -
Transit and Transit Custom Hybrid PHEV.
OEM Code : 412-157

Ford A/C Compressor Clutch Pulley Retaining Tool
3/8in.Dr - Required when changing the A/C pump or pulley
Holds the compressor pulley still allowing the fixing bolt to be removed.
Ford vehicles from 2008 - 2015
Fiesta / from 2008
B-Max / from 2012
C-Max / from 2010 & 2015
OEM Code : 412-103

Vauxhall / Opel Pump Sprocket Retainer
For 2.2 Chain Drive Petrol Engines.
Used to keep the engine in the timed position during
removal / installation of the coolant pump.
Allows the pump to be replaced without the timing chain being disturbed.
OEM Codes : J-43651 | KM-43651

Water Pump Sprocket Holding Tool
for GM Ecotec engines.
Holds the timing chain and gear in place while
removing or installing water pump on
Chevrolet / Opel / Vauxhall Ecotec engines.
Simply remove access plate from front cover an

Air Conditioning Service Kit
For AC Compressor Clutches on most vehicles.
With 2 and 3 hole Puller Plate

A/C Receiver / Drier Core Plug Remover
For new condensers where the drier is located inside the unit
on Vauxhall / Opel / Ford / VAG vehicles.
Universal tool for plugs with 5mm inside thread
Screw the remover into thread of the sealing cover and pull straight up

Air Conditioning Water Pump Pulley Locking Wrench - VAG
Audi / VW Pump Pulley Wrench
For holding the water pump pulley on VAG vehicles

12pc Air Conditioning Set
Valve Cap Removers - SWI 2mm / SW15mm
Valve Core Tools - Standard 2.2mm / Large 3.2mm
Tamper-proof Bits - T10 to T40
Bit Adaptor - 1/4in.Dr

Special Socket
8 Point | 100mm Deep | 3|8in.Dr
For loosening and tightening intake manifold fastening screws.
Applicable to : Mercedes | Nissan | Opel | Renault Vehicles
with 1.6 DCi | CDTi Engines

High Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

Low Pressure Adjustable Quick Coupler
Adapter for A/C manifold gauge set / R1234YF type.
Quick and easy connect / disconnect
Protection sleeve to provide safety protection
to avoid injury and refrigerant loss, defending against leakage.

Air Conditioning System Test Kit
For testing automotive air conditioning systems using R1234YF
refrigerant only by comparing the high and low pressure readings.
60mm gauges with tough rubber protective guard with 7/16in. copper coupler
Low : -30 - 120 psi / -1 - 8 bar
High : 0-500 psi / 0 - 35 bar
Blue Hose - 1/4in. FFL x 50in.
Red Hose - 1/4in. FFL x 50in.
Yellow Hose - 1/2in. ACME x 50in.
Sight glass for viewing condition of refrigerant.

Air Conditioning System Test Kit
Use to test / evacuate and fill A/C systems
using the R134A refrigerant.
Compares high and low pressure readings
using the vehicle A/C system specifications.
Twin 70mm gauges with impact-resistant lenses.
Sight glass for viewing condition of refrigerant.
Quick-connect fittings. High pressure safety valve.

Carbon Dioxide Manifold Gauge Set
For measuring pressure on air conditioning systems
using R744 refrigerant / carbon dioxide.
Includes Gauge and Valve Block with Hook.
High and Low Pressure Hoses with
connecting hose to service device.
Units in PSI / Mpa
G1/4-19 thread.
Steel braided hoses for CO2

230V Vacuum Pump
Power: 1/4Hp
Rotating speed: 1440rpm
Inlet port : 1/4 SAE
Oil capacity : 200ml
Ultimate Vacuum : 10pa / 75ml
Use with CT3622 Manifold Gauge Set

Antifreeze and Coolant Tester
Easy read scale and pointers.
Calibrated in degrees C and F.
Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
Tests Ethylene Glycol strength while the engine is hot or cold.
Composite body and rubber bulb for workshop durability.

Hand Held Refractometer
For measuring the freezing point of
either Propylene or Ethylene Glycol based antifreeze
May also be used for checking the strength of battery electrolyte

Block Tester Kit
With Block Tester Powder
Detects exhaust gasses in radiators
and so checks for gasket damage
or cracked and warped cylinders.
Works with Petrol engines.
Not recommended for Diesel vehicles

8pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Block Tester Powder and Bottle
For use with Block Tester Kit CT1133 and CT3923

Leak Detector Set with 3W UV LED Light
Allows detection of leaks in Air Condition Systems also
Engines and Gearboxes in conjunction with fluorescent additives.
Includes 3W LED UV flashlight.
1500mAh Rechargeable battery with charger
Protective glasses with special UV filter
Hose / Syringe and Adaptor.

12V Smoke Leak Detector
For detecting leaks in pipe systems on cars and motorcycles
such as fuel pipes / air intakes and the radiator.
Smoke output value : 1 - 6 L/min
Output Pressure : 10 - 18psi
With Built-in air pump / Controllable flow value
Test Oil Capacity : 100ml
Supplied with all accessories needed.

Identifying Clips - 9 colour coded pairs

4pc Pipe Line Stopper Kit
Sizes : Banjo | 3/8 | 5/16 | 1/2 Inch
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with an

4pc Pipe Line Stopper Kit
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Sizes - Banjo | 3/8 | 5/16 | 1/2 Inch

Radiator Fin Reformer
Straighten damaged fins.
Remove debris without damage.
Use on oil coolers and air conditioner condensers.
Suitable for most makes and models of vehicles.
With spacing of 8 | 9 | 10 | 12 | 14 and 15 fins per inch.

8pc HGV Cooling System Pressure Test Kit
For testing leaks in heavy goods vehicle cooling system.
Adaptors have quick-release couplings and pump is fitted with large
easy to read dial clearly marked in both psi and bar.
Quickly identifies faulty gaskets / radiators / weeping pipes
and other causes of coolant loss
Applicable to : DAF / ERF / Iveco / MAN
Renault / Mercedes-Benz / Scania / Volvo

5pc Universal Cooling System Pressure Test Kit
Four universal cone adaptors fit a wide range of vehicles.
Hand pump with gauge allows simple and easy controlled testing.
Release pin allows depressurisation prior to detachment.
Contents:
Pressure pump
Cone adaptors : 17-24mm | 28-31.5mm | 37-39.5mm | 47-48.5mm
Cone adaptor system for sealing and pressurising the cooling system.

Universal Radiator Pressure Tester & Vacuum-Type Cooling System Kit
Adjustable radiator test adaptor suits most vehicles.
Tests for leaks and allows quick change of coolant in vacuum systems.
40 - 75mm vacuum purge and refill tool connection
fits nearly all types of radiators

32pc Radiator Pressure and Cooling System Tester
For pressure testing radiators on most popular vehicles.
Will also pressure test radiator caps for leakage.
30 Colour Coded Adaptors -
allow direct connection to radiator or expansion tank.
Hand pump with gauge graduated with BAR and PSI
for easy controlled pressurization via a quick coupling system.
With Pressure release pin.

Radiator Pressure and Cooling System Test Kit
Universal test for leakage in radiators and coolant systems.
Colour coded caps | Vacuum purge and refill tool
Pressure testing range 0 - 35 psi / 0 - 2.5 bar
17 test caps for testing cooling systems on most vehicles

14pc Radiator Pressure Test Kit
Universal for Most Vehicles
Pressure Testing Pump with Gauge
Temperature Testing

Cooling System Vacuum Purge / Refill Kit
Supplied with three adaptors.
Air Pressure : 90 psi.
Air Consumption : 12cfm.
Fluid Hose Length : 900mm.
Air Inlet Size : 1/4 BSP.