5pc Auxiliary Belt Tension Set
for Ford and PSA Diesel Engines.
Provides a safe and controlled method of adjusting the
tensioner position during removal and installation of the auxiliary belt.
Includes various adaptors along with an ex

Camshaft Locking Tool
for Audi | Ford | Seat | Skoda | Volkswagen | Volvo
Essential for setting and locking the camshaft
and crankshaft when changing the timing belt.
Includes :
Setting spigot OEM ref.23-047/2064
Setting bracket OEM ref.21-105/2065A

Ford Crankshaft Holding Tool
Prevents the crankshaft moving when releasing
or tightening the crankshaft pulley fasteners.
The unique head profile permits access via a deep socket to each of the pulley bolts.
Applicable to : Mondeo and Transit 2.0 / 2.2 / 2.4 / 3.2 litre -
Duratorq Di / TDDi / TDCi Diesel and 2.3 Duratec HE petrol engines.
NOTE : Deep socket is not supplied.
OEM Code : 303-1310

Ford Crankshaft Damper Holding Tool
for 2.0 / 2.3 / 2.5 litre engines
Applicable to : Fusion / Transit Milan / MKZ Escape / Ranger Mariner
plus Hybrid Vehicles.

Crankshaft Pulley Tool
Ford / Volvo 1.8 | 2.0 | 2.3 - 16V Duratec Chain Drive Engines.
For counter holding the crankshaft pulley while
the pulley retaining bolt is loosened or tightened.
Ford : C-MAX | Fiesta | Focus | Galaxy | Mondeo | S-MAX |Transit
Volvo : C30 | S40 | S80 | V50 | V70
OEM Code : 9997218

Crankshaft Pulley Puller
For removing the vibration damper / pulley
installed on Ford 2.0 EcoBlue TDCi engines
when accessing the timing belt.
Applicable to a range of Ford Vehicles.
OEM Codes : 204-158-01 | 205-295
Crankshaft nose protector spigot / puller.

Ford Crankshaft Pulley Removal Tool
for EcoBlue 2.0L Engines.
This tool ensures the vibration damper can be removed without
causing damage to the bonded rubber section of the pulley.
Applicable to : Kuga / Ranger and Transit.
Thrust bolt / external hex drive - 11mm
Thrust spindle / external hex drive - 19mm
OEM Code : 303-1657

Ford Flywheel Locking Tool
For loosening and tightening the flywheel and crankshaft pulley
With Base Plate and 3 pawls : 11mm | 29.5mm | 41.2mm.
Suitable for a wide range of Ford Engines up to 2017.
OEM Codes : 21-168
303-1272 | 303-393 | 303-393-01 | 303-393-02

Timing Tool Set
For Camshaft / Crankshaft and Flywheel Locking.
Allows inspection and adjustment of engine timing
on Ford / Peugeot / Rover / Volvo - 2.0 | 2.2LD vehicles.

Fiat Timing Tool Set
Twin Cam Petrol Engines : 1.2 | 1.4 | 1.6 | 1.8 | 16V
JTD Diesel Engines - 1.9D / TD | 1.9JTD | 2.4TD / JTD
Camshaft Locking Tool
Crankshaft Locking Tool
Crankshaft Pulley Tool
Flywheel Locking Tool
Injection Pump Shaft Locking Tool
Timing Belt Tensioning Tool

Fiat Timing Tool Set
Fiat / Ford / Lancia 1.2 | 1.4 8V Belt Drive Petrol Engines
Includes :
Crankshaft Locking Tool
Camshaft Setting Tool
Camshaft Sprocket Locking Tool
Camshaft Cover Aligner
Camshaft Aligning Tool
Tensioner Adjuster

Fiat / PSA Timing Tool Set
Camshaft | Crankshaft Locking and Setting Kit
for Chain Drive 1.3L TDCI | CDTI Diesel Engines.
on Fiat Group | Ford | GM | Suzuki vehicles
Camshaft Alignment tools
Flywheel Alignment Pin
Chain Tensioner Retaining Pin

Fiat / PSA Timing Tool Set
for Alfa / Fiat / Ford / Lancia / Opel / Suzuki
For checking and adjusting the timing on
1.2 | 1.3 | 1.4 | 1.6 | 1.9 | 2.0 | 2.4 Engines.
Camshaft Locking and Adjusting Tools
Crankshaft and Flywheel Locking Tools
Injection Pump Adjusting Tools
Tensioning Tools
TDC Indicators.

Fiat / PSA Timing Tool Set
for Alfa / Fiat / Ford / Lancia / Opel / Suzuki
For checking and adjusting the engine timing.
Suitable for a wide variety of models.

Ford Camshaft Sprocket Puller
Size 90 x 65mm
Applicable to - F8M | F8Q | S8U | S9U
Also suitable for removing the Impeller.
Also found in Timing Tool Set CT3429

Clamping Washer Heat Shield Tool
For the removal of, or fitting clamping washers
which are used on under body heat shields etc.
1/4in.Dr for use with cordless tools.
Applicable to Ford and VAG Group vehicles :
Audi / Seat / Skoda

Ford Rear Camshaft Pulley Installation and Removal Kit
for Ford and Mazda V6 Engines
Specifically for removing and reinstalling the rear camshaft pulley
which connects to the water pump during servicing.
Applicable to : Ford / Mazda 2.5L | 3.0L V6 engine.

Ford Timing Tool Set
For aligning the engine timing on
1.0L Ecoboost 3 cylinder SCTi Petrol Engines.
Applicable to : B-Max | C-Max | Grand C-max.
EcoSport | Fiesta | Focus | Transit | Tourneo.

Ford Timing Tool Set for 1.5L Duratec Engines in
Ecosport / Escape 7.57 / Fiesta and Focus.
Aligns and locks the camshaft in the right position.
OEM : 303-1639 | 303-1643 | 303-1647 | 303-1648

Ford Timing Tool Set
for 1.5L 3 Cylinder EcoBoost Petrol Engines
With Flywheel Holding Tool and Camshaft Locking Tool.
Allows timing chain replacements and
engine rebuilds on chain driven camshafts.
Applicable to :
Ford Focus Eco-Boost 2018 and newer.
Ford Focus ST Eco-Boost 2018 and newer.
Fiesta Duratec 2018 and newer.
Ford Kuga 1.5L Eco-Boost 2019 and newer.

Ford Camshaft Setting Tool
for Ford 1.6L EcoBoost Petrol Engines.
For locking the camshaft when servicing the timing chain.
Applicable to the Sigma 1.6L EcoBoost 2010 onwards.
OEM Code : 303-1552

Ford Timing Tool Set
for Ford 1.6 TI-VCT Duratec Engines
For timing belt replacement on 1.6 Ti-VCT Duratec EcoBoost Engines.
With Camshaft / Crankshaft and Flywheel Locking Pins
used to lock the camshafts in their timed position
when removing belts and pulleys during servicing.
Suitable for many other petrol and diesel Ford engines.

Ford / Volvo Timing Tool Set
For 1.6L / 2.0L GTDI T4 / T5 V4 Engines
To adjust and fix angle of camshaft and crankshaft.
Applicable Models : S60 | S80 | V40 | V60 | V70 | XC60
Also for Ford cars with 1.6 SCTi / Ti-VCT Eco boost engines.

Ford Timing Tool Set
For replacing the cam belt on Ford Focus Vehicles
1.6 TI-VCT | 2.0 TDCI / 2003 - 2007
Camshaft Sprocket Holding Tool
Camshaft Sprocket Locking Tool
Tensioner Pulley Locking Pin
Crankshaft Timing Pin
Flywheel Timing Pin

Ford / Mazda Timing Tool Set
Combination kit of Setting and Locking Tools
suitable for a wide range of Ford petrol and diesel engines.
Includes camshaft and flywheel locking tools various timing pins
plus a camshaft sprocket removal tool.
Also suitable for Land Rover / Mazda / PSA / Suzuki and Volvo vehicles.

JLR Timing Tool Set
For Jaguar Land Rover 2.0 Chain Drive Petrol Engines
With crankshaft pulley and crankshaft sensor positioning tools

Ford Timing Tool Set
For locking and checking the camshaft on -
Ford / Jaguar 2.0L EcoBoost / Duratec Petrol Engines.
Land / Range Rover 2.0L GTDI and Si4 Diesel Engines.

Ford Injection Pump Service Kit
For Removing and Installing Injection Pumps on
2.0L Ecoblue TDCi Diesel engines.
Applicable to : Transit / Transit Custom and Tourneo Custom.
Engines : AWD | FWD | RWD / from 2016
Focus | Galaxy | S-Max / from 2018
Ranger from 2019.

Ford Timing Tool Set
For checking and setting the latest Ford 2.0D EcoBlue TDCi engine
which features an innovative - belt in oil design where
the synchronous drive belt is sited inside the oiled area of the engine.
Flywheel Holding Tool : OEM 303-1643
Crankshaft Alignment Tool : OEM 303-1637
Timing Belt Installing Cups : OEM 303-1650
5mm hex key wrench

Ford Timing Tool Set
For the 2.0L EcoBoost SCTi and Ti-VCT engines
in Focus / Galaxy / Mondeo / S-Max models.

Ford Timing Tool Set / 2.2L | 3.2L TDCi
For locking the crankshaft and flywheel to allow the TDC sensor position
to be set after removal when servicing the cam chain drive system.
Ford Ranger 2.2L / 2011 - 2015
Ford Ranger 3.2L / 2011 - 2016
Ford Transit 2.2L / 2006 - 2016
Ford Everest 3.2L / 2015 onwards
Mazda BT-50 / 2011 onwards
ECOnetic and HDT engines including the popular 3.2L diesel engine.

Ford Timing Tool Set
for Ford / Mazda / VAG / Volvo
Provides checking and adjusting engine timing.
Camshaft / Crankshaft Locking and Adjusting Tools
Chain / Tooth Belt / Drive Belt Tension Tools
Crankshaft Sprocket Holder and Alignment Tools
Locking Bracket and Support Guides
TDC Indicator and Dial Test Indicator
Injection Pump Tools

Ford / Mazda / Volvo
Petrol Engine Setting / Locking Kit
Covers the complete range of Ford Duratec engines
1.25 through to 2.3 16V in both belt and chain drive variants.
Also suitable for Duratec engines in Mazda and Volvo vehicles.
See detail page for full list of vehicles and engine codes.

Ford Diesel Engine Timing Kit
for Chain Drive 1.8TDi / TDCi engines
For timing belt replacement on diesel engines
fitted to Ford 1.8TDDi / TDCi chain drive vehicles
and high pressure fuel pump Wet Belt applications.
With high pressure pump sprocket removal
and timing chain cover alignment tools.

Ford / Mazda Timing Tool Set
Comprehensive Engine Timing Tool Kit for most Ford models
including petrol and diesel also the latest Zetec engines.
Includes special pins required to lock the camshaft sprocket /
flywheel and align the crankshaft and fuel pump when checking
the valve timing on 2.0 and 2.4L chain driven engines
and or replacing the timing belt on 1.4L engines.

Ford Timing Tool Set
for Ford / Mazda / PSA / Volvo
For setting engine timing when replacing the camshaft or cylinder head gasket.
Camshaft locking pin. Flywheel locking bolt
Crankshaft / high pressure pump locking pin.
PSA - Citroen / Peugeot 1.4 / 1.6 Hdi
Mazda 1.4CiTD
Ford 1.4TDCi / 1.6TDCi
Volvo 1.6D

Ford Fuel Pump Sprocket Puller
for Ford Transit 2.2L TDCi
From 2011 fuel pump sprockets no longer have threaded holes fitted in them
this tool allows the pump removal without removing the timing chain.
Applicable to : Ford Transit from 2011

Ford Fuel Pump Sprocket Tool Set
for Ford Transit 2.0 / 2.2 / 2.4 / 3.2 TDDi TDCi
For removing and installing the high press pump sprocket cover
and keeping the engine shaft in place when changing the timing belt or
performing other engine repairs | and to replace the injection pump on -
Ford: Mondeo / Transit / Jaguar X-Type / Land Rover Defender
Fiat Ducato / Citroen Jumper III Relay / Peugeot Boxer 3 / LDV Convoy.

Ford Timing Tool Set
for Duratorq 16V Engines
in Mondeo and Transit 2.0 / 2.4 TDI TDCI from 2001 to 2004
For Locking the camshaft / injection pump shaft
or crankshaft in position when changing a timing belt
or during other engine repairs to remove and replace the injection pump.
Mounting / Demounting tool for the injection pump.

Timing Tool Set
for Ford / Mazda / Volvo / VAG
For checking and adjusting the engine timing.
Camshaft Adjusting Tools.
Injection Pump Adjusting Tools.
Flywheel / Crankshaft Locking Tools.
Camshaft Sprocket Puller.
Feeler Gauge.

Ford Timing Tool Set
Ford / Land Rover / Mazda
For Locking the camshaft and crankshaft when servicing the timing chain
on 4.0L SOHC V6 engines in Ford / Land Rover / Mazda vehicles.
Applicable to :
Ford Courier / 05-06
Explorer / 96-08
Mazda B4000
Land Rover Discovery 3 / 05-09

JLR Diesel Fuel Pump Locking Tool
Used to position and lock the high pressure fuel pump into its timed position
when changing the fuel pump drive belt on Jaguar Land Rover 3.0L TDV6.
Applicable to :
Jaguar XF / 09-18 | XJ / 09-14 | F-Pace / 16-18.
Land Rover Discovery 3 / 04-09 | Discovery 4 / 09-20.
Range Rover L405 / 12-20 | Sport / 09-20 | Velar / 17-20.
Engine Codes : 306DT | AJ-V6D/306DT

PSA Timing Tool Set
for Citroen / Fiat / Ford / Lancia / Peugeot vehicles
For adjusting the engine timing when renewing the timing belt
or replacing the cylinder head and gasket etc.
Suitable for engines :
Fiat / Lancia : 2.0 / 2.2 JTD
Ford : 1.4 / 1.6 Duratorq TDCI
Citroen / Peugeot 1.0 to 2.2 16V

VAG Crankshaft Locking Tools
for 1.4 | 1.6 |1.9 | 2.0 TDI Engines / 2002 - 2008
Allows checking and adjustment of the engine timing
during tooth belt and camshaft replacement.
Crankshaft Locking Tool
Pump Wheel / Camshaft Locking Tool
Crankshaft Locking Tool
Locking Pin - 4mm
Locking Pin for V-belts

Volvo Camshaft Belt Tool Kit
Used for the replacement of the camshaft drive belt
on popular Volvo 2.0L and 2.5L - 5 cylinder diesel engines.
Like - C30 | C70 | S40 | S60 | S80 | V40 | V50 | V60 | V70 | XC70 range.
With Crankshaft Pulley Holding Tool
Camshaft and Crankshaft Locking Pins

Volvo / Ford Timing Tool Set
for 1.6 | 2.5 | 2.4D Engines
For setting the camshaft and crankshaft timing
when replacing the cylinder head gasket.
Crankshaft Holding Wrench
Camshaft Timing Tool
Crankshaft Timing Tool
Camshaft Holder

Ford 5th Gear Puller
Fast and simple method of removing the fifth gear
on front wheel drive transmissions before carrying out internal repairs.
The split collar and retaining sleeve ensures a safe and positive location.
Applicable to : Fiesta / Focus / KA / Mondeo / C-Max / Galaxy and Transit Vans.