Air Condition Belt Installation Tool
for BMW N62 / MINI W17
For installation of stretch belts or drive belts without tensioner
Suitable for stretching belts on -
BMW N62 / V8 2004 - 2006
MINI W17 / Diesel
OEM Code : 641040

BMW N47 Diesel Crankshaft Locking Tool
For locking the crankshaft in timing position.
Required when replacing one of both timing chains.
Used to measure the amount of chain stretch without dismantling the whole engine.
Applicable to BMW N47 1.6 and 2.0L diesel engines from 2013.

BMW / Mini Camshaft Drive Chain Wear Indicator
For checking the timing chain stretch on BMW Mini petrol engines
without dismantling the engine.
Applicable to Mini Clubman / Club Van / Countryman / Coupe
Paceman and Roadster with 1.4L and 1.6L engines.
Also useful on equivalent PSA engines.
OEM Code : 2353281

BMW Front Crankshaft Timing Case Cover Remover / Installer
For correcting alignment of the front crankshaft timing case cover / at bottom
also helps prevent damage to the new seal during fitting.
Applicable to : BMW 1 | 2 | 3 | 4 Series - X1 | X2
Mini Clubman / Hatch / Countryman.

BMW Front Crankshaft Seal Installer
For removing or installing the front crankshaft oil seal on BMW model engines :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54
BMW model engines.
OEM Codes : 119230 | 119231 | 119233 | 119235 | 2212822

BMW Crankshaft Oil Seal Kit
For removal and installation of the rear crankshaft oil seal.
Applicable to :
N40 | N42 | N45 | N45T | N46 | N46T | N52 | N53 | N54.
OEM Code : 2212827

BMW Crankshaft Seal Tool Set
For removing and installing the front and rear crankshaft seal.
Applicable to :
N20 / N26 / N40 / N42 / N45 / N45T
N46 / N46T / N52 / N53 / N54 / N55
OEM Codes :
110370 | 119181 | 119182 | 119183

BMW Crankshaft Pulley Holder
For holding the crankshaft pulley while loosening or tightening
the middle pulley bolt then removing and replacing vibration dampers.
Applicable to : BMW N47 and N57 engines.
Vibration Damper Brace
Holding Sleeve and Screw : M8 for N47 / N57
Holding Sleeve and Screw : M10 for N47TU / N57TU

BMW Mini Crankshaft Turning / Holding Kit
Specially designed to rotate the crankshaft and fix the flywheel.
Crankshaft Pulley Turning Tool
Flywheel Drive Plate Holding Tool
Securing Bolt and Spacer
Flywheel Bolt Socket

BMW Flywheel Locking Tool
for BMW / MINI engines -
N40 to N73 | M47TU | M54 | M57T2/TU | S85 | W17.
With Counter Holder / Spacer Sleeves /
Reduction Sleeve and Mounting Screws.
For locking the flywheel when loosening or
tightening the pulley and the flywheel itself.

BMW Crankshaft Harmonic Balance Tool
for BMW 3 & 5 Series.
Engines : E39 | E46 | E60 | E61 | E81 | E83 | E90 | E91
Holds vibration damper when loosening and tightening centre crankshaft bolt.

Oil Pump / Balance Shaft Alignment Kit
for BMW 1 | 2 | 3 | 4 Series - 6L / 2.0L Petrol Engines.
For fixing the balance shaft and holding the chain sprocket
when used for repairing the chain and sprocket wheel drive.
Applicable to Engine Codes : N20 | N26 2012 - 2017
OEM Codes : 2 212 825 | 2 318 117 | 11 4 120

BMW Timing Tool Set
For checking and setting camshaft timing when installing
the VANOS adjustment unit on BMW M3 vehicles with
chain drive 3.2L / 6 cylinder 24 valve S54 petrol engines.
Valve timing checking tool.
Camshaft setting tool and pins.
VANOS alignment lever.
Crankshaft Turning Tool and Locking Pin.
VANOS Spacers.

BMW Timing Tool Set
kit for Dismantling and Assembling the Camshaft
preparing Valve Timing and Cambelt Servicing.
For models : 3 | 5 | 7 | X3 | X5 | Z3 | Z4 |
E30 | 31 | 32 | 34 | 36 | 38 | 42 | 46 | 53 | 60 | 61 | 65 | 66 | 83 | 85
Engine Codes : M40 | M44 | M50 | M52 | M54 | M56 with DOHC

BMW Timing Tool Set
Setting and locking set for BMW petrol engines.
Includes tools for setting and locking camshafts.
Plus tools for setting up timing chain tension.

Engine Codes :
M40 | M42 | M50 | M60 | M62 | M70

OEM Codes :
113240 | 112300 | 115120 | 11440 | 113390 | 114220

BMW Timing Tool Set
For the Removal and Installation of the Camshaft Chain
and adjusting the timing on -
BMW Diesel Engines :
M41 | M47TU | M47TU T2.
M51 | M57TU T2 3.01 / 1998 - 2008.

OEM Codes :
112300 | 113340 | 113360 | 135190
135191 | 135192 | 116320 | 116321 | 116322

Diesel Timing Kit
For BMW | JLR | PSA Chain Drive Vehicles
A comprehensive kit designed for
setting camshaft and crankshaft timing position.
Suitable for 1.8 | 2.0 and 2.5 chain drive diesel engines.
With Timing Chain Compressor and Locking pins
Injection Pump Lever and Sprocket Puller
Crankshaft Holding Tool

BMW Timing Tool Set
For replacing the timing belt or chain on both petrol and diesel engines.
Special wrench for removing and installing the VANOS unit.
M22 threaded for M42 / M60 engines
M26 threaded for M50 / M52 engines

BMW Single VANOS Camshaft Timing Kit
For setting engine timing during chain removal and installation.
Compatible with some BMW 4 and 6 cylinder none VANOS engines
With Camshaft Locking Plate
VANOS Turning Wrench
and Top Dead Centre Pin

BMW Camshaft Alignment Tool Kit
For BMW M47 and M57 2.0L 16 valve engine servicing.
Applicable to a wide range of BMW vehicles
With Crankshaft pin / Camshaft setting plate
Clamp for camshaft locking tool and 2 timing pins.

BMW VANOS Camshaft Alignment Tool Set
Tools to assemble and time the VANOS units on
BMW M52TU / M54 and M56 / 6 Cylinder Engines.
Alignment Jig Adjusting plate for setting valve timing.
Jig for pre-assembling secondary chain sprockets.
Lock Pin secures chain tensioner during timing.
VANOS Compressed Air Connector

BMW Timing Tool Set
for M60 / M62 / M62TU VANOS Equipped Engines.
Allows checking and adjusting the engine timing
Chain Tensioner Tool
Camshaft Locking Tools for cylinders
Crankshaft Locking Tool
Rotating Tool
Transmitter Wheel Tool Sets
Vanos Valve Socket

BMW Timing Tool Set
for N20 and N26 Engines
Engine alignment tools applicable to
BMW 4 cylinder turbo engines.
With Camshaft Locking Tool
Camshaft Fixating Base
Alignment Pin
Chain Tensioner

BMW Timing Tool Set
for 1.6 N40 / N45 / N45T Petrol Engines
with Vanos Alignment Plate
Camshaft Setting Plate - Inlet
Camshaft Setting Plate - Exhaust
Timing Chain Tensioner Pre-load tool
Flywheel Locking Pin
Camshaft Setting Plate Securing Screw.

BMW Timing Tool Set
Contains important tools for dismantling and assembling camshafts.
during servicing and valve timing.
For models : 1 | 3 | S | X3 | Z4.
Series Type : E87 | 46 | 60 | 85 | 83 | 90 | 91.

BMW Timing Tool Set
for 1.8 and 2.0 Chain Drive Petrol Engines
Allows adjusting and setting timing on Valvetronic systems.
Includes tools to align the Twin Vanos unit.
Suitable for BMW N42 / N46 N46T

BMW Timing Tool Kit Set
For use on N43 Chain Driven Engines
In Series 1 | 3 and 5 models
Includes Vanos sensor alignment tool

BMW Timing Tool Set
for N47 / N47s 2.0 Twin Cam / Chain Drive Diesel Engines
Fitted in the 1 Series / 3 Series / 5 Series and X3
Crankshaft turning tool to rotate engine to TDC position

BMW Timing Tool Set
For Diesel N47 / N47S engines with chain drive.
With injection pump lock adapter
and Camshaft Chain Tensioner Lock.

BMW N47 / N47S Diesel Engine Timing Tool Set
for turbocharged chain drive BMW 4 & 8 cylinder diesel engines
2.0 N47 | N47S | N57 | N57S / 2007-2015
Camshaft Locking
Sprocket Puller
Crankshaft Lathe
Crankshaft Wheel Locking Pin
Crankshaft holding & Locking tools
2 Pins to lock the chain tensioner

BMW Timing Tool Set
For engine codes : N51 | N52 | N53 | N54
With Camshaft and Crankshaft Locking Tools
Transmitter Wheel Locking Tool.
Suitable for a wide range of models.

BMW Timing Tool Set
For the removal and installation of the variable camshaft unit
on BMW 6 Cylinder Engines : N51 / N52 / N53 / N54 / N55
with T.D.C pin
Camshaft Alignment Jig
Tension Adjuster
Setting Gauge

BMW Timing Tool Set
BMW Engine Camshaft Alignment Tool Kit
To enable the correct timing when servicing
N40 / N42 / N62 / N62TU / N73 engines with dual camshafts.
Gauges for locating camshaft in TDC position
Pin for locking flywheel in TDC position

BMW Timing Tool Set
for N63 / N74 / S63 Models
N63 engines up to September 2012.
N74 V12 Engines which are not very common.
S63 engines prior to September 2011.

BMW Timing Tool Set
for N63 and S63 4.4L V8 Engines
Engineered to locate the camshaft in TDC position
to check and adjust the timing chain tensioner on -
S63 - 5 series F10 M5 2010 - 2014
S63 - 6 series F06 / F12 / F13 M6 2011 - 2014
S63 - 6 series F06 650i / 650ix 2011 - 2014
N63 - 7 series F02 ALPINA B7LX 2013 - 2014
N63 - X series F15 X5 2012 - 2014

BMW Timing Tool Set - S65
Provides alignment to top dead centre point to maintain the engine.
Camshaft Alignment Tools
Chain Tension Guide Locking Tool
Split Camshaft Gear Setting Tools
Mounting Screws for camshaft adjusting tools
Applicable to : BMW M3 E90 / E92 / E93 2007-2013
Engine codes: S65 B40A / 4.0L

BMW / Mini Diesel Timing Tool Kit
Engine timing tool kit for diesel BMW Mini
with engine codes W16D16 / 9HZ and W16D16UO
used on Mini / Clubman 07-10 with chassis R55 | 56 | 57.
Also used on -
Citroen: 1.6 diesels in C2 | C4 | C5 |
Xsara Picasso | Grand Picasso | Berlingo
Peugeot : 1007 | 206 | 307 | 207 | 308 | Partner Mk3

BMW / Mini Timing Tool Set
for BMW / Mini One 2001-06
Mini Cooper 2001 - 06 and Mini Cooper S 2002 - 06
Set contains Camshaft Sprocket Holding Tool
Engine Support Bracket and Tension Assembly Tool
This kit is specifically designed for petrol engines on pre 2009 Mini One / Cooper and Cooper S models.
Engine Codes : W10 | W11 | N14

BMW / Mini Timing Tool Set - N13 / N18
Comprehensive tool kit for setting camshaft timing on
1.6 petrol engines in BMW and Mini since 2012.
To lock camshafts in 90 degree piston position / TDC.
Camshaft locking fixtures with hold-down bolts
Crankshaft locking pins
Rigid Chain Tensioner

BMW Camshaft Vanos Socket
22mm / 16pt / 1/2in.Dr
For installing and removing the BMW MINI Vanos unit.
Also the Ford VCT module.
Applicable to : BMW MINI 1.2 / 1.5 / 2.0 L petrol
B36 | B38 | B48 | B36 | B38 | B46 | B48 | B58
M1DA | M1DC | M1DD | M1DH | M2DA | M2DB | M2DC
Ford 1.0 Ecoboost / SFDB.
OEM Codes : 2450487 | 303-1661-3
Chrome-Molybdenum

BMW / Mini Timing Chain Kit
For 1.2 / 1.5 / 2.0 / 3.0 Petrol Engines
Applicable to :
1 / 2 / 3 / 4 / 5 / 6 / 7 series
i8 / X1 / X2 / X3 / X4 / Z4
Mini : Clubman / Hatch / Convertible / Countryman.
Engine Codes : B38 - 1.2 / 1.5 | B48 - 2.0 | B58 - 3.0
Suitable for the latest B38 / B48 Mini and B38 / B48 / B58 BMW engines.

BMW / Mini Engine Camshaft Timing Tool Set
Variable Camshaft Timing Unit Removal and Installation Kit.
Applicable to : BMW Mini B38 / B48 / B58 Engines.

BMW / Mini / PSA
Petrol Engine Timing Kit
For 1.6 Turbo Petrol Engines.
Applicable to :
Mini / Clubman / Cooper S - JCW / R55 / 56 / 57
Coupe / Roadster / Countryman / Paceman - JCW / R58 / 59 / 60 / 61.
OEM Codes : 119550 | 119551 | 119552 | 119590

BMW / Mini / PSA Timing Tool Set
For timing 1.4 & 1.6 Valvetronic direct injection chain drive petrol engines
fitted in BMW Mini / Citroen and Peugeot vehicles.
With Camshaft Locking Tools
Camshaft Alignment Clamp and Crankshaft Setting Pin.
M6 Setscrews Chain Tensioner.
Mini Cooper / Coupe | Citroen C4 | Peugeot 207 / 308 / 3008 / 5008

BMW / Mini / PSA
Petrol Engine Timing Chain Service Tool Kit
Essential for the removal or installation of the timing chain assembly
on a range of BMW / Mini and PSA petrol engines.
Kit includes balance shaft aligners
crankshaft gear holding tools
and chain tension locking pin.

VAG Timing Tool Set
for 2.5 / 2.7 / 3.2 / 3.4 / 3.6 Porsche 911 / Boxster Engines
Allows engine timing when performing valve-train service.
With - TDC Alignment Pin
Camshaft Lock & Alignment Tools
Camshaft Holding Tools
Connecting Rod Centring Mandrel
Piston Pin Driver and Extensions
Porsche Boxster : 2.5 / 2.7 / 3.2 - 986 / 987 1998 - 2000
Porsche 911 : 3.4 / 3.6 - 996 / 997 2002 onwards

BMW Flywheel Tool Set
For Diesel and Petrol chain drive engines.
Found on most BMW K | M | N models
The tool can also be used to hold the flywheel when
removing the timing chain for cylinder head work.