Automotive Battery Tester
Voltage Test Range : 2.0 | 3.0 | 4.0 | 5.0 | 9.0 | 12.0 | 12.5 | 13.5V
Indication : LED lights up to the Voltage reading.
Frequency range: 0 to 60 Hz.

12 Volt Battery Capacity Testing
LED light display
Weight 95g
NOTE - Chemical Properties can not be tested

Battery Tester >br> Suitable for 6 | 12 | 24V DC circuits
Knurled metal body with test light.
Probe tip is covered with protective screw cap.
Tester illuminates when voltage is present.

Automotive Battery Tester
Suitable for 6 | 12 | 24V DC circuits
For detecting faults in low tension circuits in automotive vehicles.
such as Cars | motorcycles | bulldozers | road rollers | excavators

Digital Battery Tester
125A battery load tester for 12V DC lead acid batteries
Battery condition LEDs give a very clear indication of the test results

Automotive Battery Tester with Integral Printer
For testing most 6V / 12V batteries
and 12V /24V Starting / Charging systems.
CCA Test Range : 40 - 2000 CCA / SAE.
Voltage Test Range : 1.5 - 30V.
Accuracy : 0.1V / CCA 5 percent / IR 5 percent.
3.2in. LCD Display back lit with adjustable brightness.
Integrated thermal printer with 57mm x 6.5M paper roll.
Multiple language display and Data up-load function.
Accessories : U disk / 3 Paper Rolls / Mini USB cable.

Automatic Battery Charger
Voltage Input : 230V AC/ 50Hz
Voltage Input Power : 75W
Voltage Output : 12V DC
Charging Current : 4.2A Effective
Battery Capacity : 20 - 80Ah
LED Indicator
Switch to Float Mode Automatically
Overcharging / Reverse Polarity and Short Protection

Automatic Battery Charger
Voltage Input : 230V AC / 50Hz
Rated Input Power : 158W
Voltage Output : 6V / 12V DC Selectable
Charging Current :
6V - 8.4A Fast / 5.2A Slow
12V - 8.4A Fast / 6A Slow
Battery Capacity :
6V - 40-160Ah Fast / 9-36Ah Slow
12V - 40-160Ah Fast / 15-60Ah Slow

12/24V Multi-Function Jump Starter
and Multi-function Travel Battery Charger
Suitable for Emergency Jump starting vehicles
or Charging Mobile Phones and Cameras.
Capacity : 30000mAh
Input : 14V / 2 Amp
Output : 5V / 1 Amp | 12V / 10 Amp
With LED Light

14V Multi-function Travel Battery Pack
With LED Light and Smart Cable Function.
Suitable for Emergency Jump starting vehicles.
Also Charging Mobile Phones
Photographic Equipment and Tablet Pcs
Capacity : 15000mAh
Output : 12V Jump Start | 19V / 3.5V | USB 5V
5hr Charge Time
Size : 189 x 80 x 37mm

12V Multi-Function Jump Starter / Emergency Work Light
480 Lumen LED work light
60 Lumen Focus Beam with SOS mode.
Jump Start Power : 500A peak cranking amps.
400A/3s for 4.0L petrol / 2.5L diesel vehicles.
IP54 Water resistant Housing with Dual USB Outlets.
Magnetic mounting.
See Video at : https://youtu.be/6WNW2dlJCSE

12V / 24V Ultra-Capacitor Jump Starter
Charging Voltage : 12V / 24V DC
Starting Current : 1500A / 900A
Peak current : 2200A / 1500A
Recharge Time : < 270 seconds
Max. Consecutive Starts : 5
Min. Interval : 20 minutes
Wo

Heavy-Duty Smart Trolley Battery Charger & Starter
LCD Display for easy reading with Slow and Fast Charge modes.
Input : 220V - 240V AC | 50 - 60Hz | 13A
Output : 12V DC - 10A /30A / 60A
Output : 24V DC - 5A /15A / 30A
Engine-cranking : 12V DC / 200A / 5s on / 180s off
Protected against Overcharge / Short Circuit and Reverse Polarity.
Supplied with Smart Clamp Leads.
Suitable battery types : STD | AGM | GEL | LifeP04

2.5M Jump Leads / Booster Cables
200 amp Light Duty
For Automotive use

3.0M Jump Leads / Booster Cables
600 amp CE Approved
Heavy Duty Spring Clamps
Ideal for General Vehicle use

3.0M Jump Leads / Booster Cables
800 amp CE Approved
Heavy Duty Spring Clamps
Ideal for Commercial as well as Private Vehicle use

6.0M Jump Leads / Booster Cables
800 amp CE Approved
Heavy Duty Spring Clamps
Ideal for Commercial as well as Private Vehicle use

Heavy Duty Jump Lead Clips - 600A
Large size : 155mm
Suitable for all car and truck batteries.
Durable / strong and Easy to attach.

Battery Terminal Clamps / Saddle Type
Suitable for positive and negative battery posts

2pc Automotive Battery Terminal Cleaner Set
Fits all terminal posts
Wire Brush for removing corrosion build-up
on battery posts and Terminals for improved electrical contacts.

Battery Terminal Puller
Jaw Capacity : 10 - 40mm
Fits most battery terminal posts without damage

Battery Terminal Crimping Tool
For replacing or repairing automotive / marine battery cables
allows secure crimping when used with a hammer or vice.
Wire gauge : 1/0 | 2/0 | 3/0 and 4/0
1 AWG | 3 AWG | 4 AWG | 6 AWG | 8 AWG
Easy to use

Universal Car Battery Isolator Cut-Off Switch
for Standard Round Post Batteries

Battery Hydrometer
For the Hot or Cold testing of Lead Acid Batteries
Range 110SP Discharged to 1300SP Fully Charged

2 Litre Automotive Battery Filler
Battery Filler with Automatic Shut-Off to prevent over filling.
Keeps your battery cell at the correct level.
With double action fast flow valve tip that prevents after-drip.
Stops surface discharges caused by a wet battery.
Polyethylene container is safe to use with battery acid.