4pc VDE Tool Set
180mm Combination Pliers
150mm Side Cutters
4mm Flat Tip Screwdriver
Ph2 Screwdriver
1000 Volt Insulated VDE Set
A Must for Working on Hi-Brid Vehicles.

7pc Interchangeable Spanner Head Set with Torque Wrench
Sizes : 17 | 22 | 24 | 26 | 27 | 29mm

10pc Torque Adaptor Spanner Set
3/8in.Dr. / 12point
Ideal for use with torque wrenches
Setting adjustment is required to compensate for the
increased length of leverage when using these torque adaptors.
Sizes :10 | 11 | 12 | 13 |

Universal Wrench Extender Adaptor
with assisted 1/2in.Drive or 21mm Hex.
Increase fulcrum leverage with a Ratchet or Power Bar.
Designed to extend your wrench with another wrench or
1/2in.drive Ratchet / Power Bar giving more leverage on
seized nuts and bolts .

385mm Spanner / Wrench Extender
Provides extra torque for rusted nuts and bolts or stuck fasteners.
Also provides easy and safe leverage for over tightened nuts.
385mm approx. for Maximum leverage for hard to reach spaces.
Universal head fits most spanners / socket wrench or hex keys.

20Kg Mixed Box of Spanners
Various Shapes and sizes with Automotive uses.

M24 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

M26 Slogging Wrench
12-point with 2 striking faces.
Central 20mm / 3/4in. Square Drive
For commercial brake Calipers on front and trailing axles.
This wrench allows assembly and disassembly of the brake Calipers
without removing the steering tie rod.

Bike Wrench
Sizes : 7 - 17mm

6pc Brake Spanner Set
Sizes- 8 x 10mm Hex
9 x 11mm Hex
1/4in x 7mm Hex
1/4in x 10mm Square
1/4in x 5/16in. Open End
7/16in. Open End 11/32in. Square

6 in 1 Spoke Wrench - 4in. / 100mm
Fits 6 Spoke Nipple Sizes : 4.2 | 4.8 | 5.3 | 5.6 | 6.0 | 6.3mm
Jaws are numbered and stepped for ease of use.

9pc Motorcycle Spoke Wrench Set
Specially designed spoke wrench with eight interchangeable heads.
Suitable for adjusting spoke tension and correcting buckled wheels.
Head Sizes :
5.4mm | 5.6mm | 5.8mm | 6.0mm | 6.2mm | 6.4mm | 6.6mm | 6.8mm

Adjustable Pin Wrench Set
with Interchangeable Pins
for nuts with top holes as found on Wheel Pulleys.
Divider type adjustment with central knurled knob.
Supplied with 8 pins / 4 pairs.
Pin size : 2.5 - 4mm | 3 - 5mm | 6 - 8mm | 7 - 9mm.
Plus 10 / 11mm Spanner.
Suitable for DIN 547 bearing nuts.

8pc Adjustable Hook & Pin Spanner Wrench Set
Jaw Range : 35 - 60 | 60 - 90 | 90 - 120mm
With interchangeable Hooks and Pin Lugs
Suitable for DIN 1804 and DIN 981 bearing nuts
For use on motorcycle suspension slotted retaining rings and
ideal for automotive / industrial / plumbing and hardware applications.
With 2 spare pins.

5pc VDE Insulated Wrench Set
Sizes : 7 | 8 | 10 | 12 | 14mm with Open Jaw
For use on Hi-Brid Vehicles

5pc VDE Insulated Wrench Set
Sizes : 7 | 8 | 10 | 12 | 14mm with Open Jaw
For use on Hi-Brid Vehicles

6pc VDE Insulated Wrench Set
Sizes : 7 | 8 | 10 | 12 | 13 | 14mm with Open Jaw
For use on Hi-Brid Vehicles

5pc VDE Insulated Ring Wrench Set
Sizes : 7 | 8 | 10 | 12 | 14 mm
For use on Hi-Brid Vehicles

5pc VDE Insulated Ring Wrench Set
Sizes : 7 | 8 | 10 | 12 | 14 mm
For use on Hi-Brid Vehicles

VW / Audi Turbo Charger Wrench
12mm Double Hex - 12pt | 3/8in.Dr
Special wrench for use on diesel engines with
Turbo Chargers fitted to VW and Audi vehicles.
This offset wrench reaches underneath the turbo charger
to assemble or disassemble the 12mm bolts.
Applicable to VAG V6 TDI Diesel Engines

VAG Turbo Actuator Adjustment Set
1/4in.Dr Socket - 10mm x 50mm Long.
12pt Spanner - 10 / 12mm x 143mm long.
Unique spanner and split socket for removing
fitting and adjusting the turbo pressure capsule
and charge pressure actuator on VAG vehicles.

14mm Open End Ring Wrench
for Diesel Injector Pipes
Ideal for injectors that have difficult access
Twin hexagon profile suitable for most diesel engines
Chrome Molybdenum

17mm Open End Ring Wrench
for Diesel Injector Pipes
Ideal for injectors that have difficult access
Twin hexagon profile suitable for most diesel engines
Chrome Molybdenum

Swivel Head Oxygen Sensor Wrench
7/8in. / 22mm

32mm Fan Clutch Nut Wrench
BMW Water Pump Removal Tool Kit
32mm Fan Clutch Wrench
Double-ended Water Pump Fan Pulley Holder
For removing water pumps on models with
temperature dependent viscosity drive fans.
Removes lock nuts on thermo-Viscous fans.

32mm Fan Hub Wrench for BMW / Ford
270mm Long
For holding the Visco-clutch drive shaft on BMW and Ford vehicles.
Especially slim design with PVC dipped handle
Enables easy access

36mm Fan Hub Wrench for Ford / Opel
270mm Long
For holding the Visco-clutch drive shaft on Ford / GM / Opel vehicles.
Especially slim design with PVC dipped handle
Enables easy access

41mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

46mm Fan Hub Wrench for GM / Opel
278mm Long
For moving the water pump on GM / Opel vehicles
in order to span the drive belt in OHC engines.
Especially slim design with PVC dipped handle
Enables easy access

2pc Viscous Fan Spanner
with Fan Hub Holding Tool

41mm Water Pump Wrench - 1/2in.Dr
For use on older GM - Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Also used on Chevrolet / Daewoo vehicles.
Engines : 1.2 / 1.3 / 1.4 / 1.6V / 1.6D / 1.8
OEM Codes : KM421A | J-42492 | J-42492-A

46mm Water Pump Wrench - 1/2in.Dr
For use on older Vauxhall / Opel engines
where the water pump is used to adjust the camshaft belt tension.
Engines : 1.6 ( 87 ) 1.7D / 1.8 ( 87 ) / 2.0 litre
OEM Code : KM409A

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.

Rear Axle Locking Nut Spanner
For loosening and tightening the wheel bearing grooved lock nut
when replacing wheel bearings on rear axle shafts or full floating axles.
Applicable to : Mercedes Sprinter / W901 - W905 rear axles.
Can be used with a 1/2in.Dr Ratchet or Power Bar.

Rear Axle Locking Nut Spanner
For removing and replacing the wheel bearing grooved lock nut
when replacing wheel bearings on rear axle shafts or full floating axles.
Applicable to : Mercedes Sprinter / W901 - W905 rear axles.
Can be used with a 1/2in.Dr Ratchet or Power Bar.