Heavy-Duty Smart Trolley Battery Charger & Starter
LCD Display for easy reading with Slow and Fast Charge modes.
Input : 220V - 240V AC | 50 - 60Hz | 13A
Output : 12V DC - 10A /30A / 60A
Output : 24V DC - 5A /15A / 30A
Engine-cranking : 12V DC / 200A / 5s on / 180s off
Protected against Overcharge / Short Circuit and Reverse Polarity.
Supplied with Smart Clamp Leads.
Suitable battery types : STD | AGM | GEL | LifeP04

2pc Automotive Battery Terminal Cleaner Set
Fits all terminal posts
Wire Brush for removing corrosion build-up
on battery posts and Terminals for improved electrical contacts.

Electronic Stethoscope Kit
Detect and identify noisy components
Super sensitive microphone with cushioned headphones
4 Pick-up sensors with 4.8 metre long cord

Digital Multimeter
LCD Display with Max. reading : 1999
Overload protection
Low battery indication
Measurement Functions : AC Voltage
DC Current | DC Voltage | Resistance and Diode.
Ideal for use in the Home / Laboratory or Workshop.

Automotive Clamp Meter
Digital LCD Screen Max. reading : 1999
Overload Protection | Auto Ranging | Zeroing Function
Max. Measurable Conductor : 25mm diameter
Voltage AC / DC : 600V
Current AC : 20 / 200 / 600A
Resistance : 2k Ohms
Continuity : Yes
2 x 3V CR2032 Batteries

6pc 3/8in.Dr Socket Set for Glow Plugs
Sizes : 8 | 9 | 10 | 12 | 14 | 16mm with Universal Joints
85mm Long
Chrome Vanadium

30pc Alternator Service Kit
1/2in.Dr - 10mm Hex Shank Adaptor.
1/2 | 3/8in.Dr Star / Spline and Hex Bits to fit most alternators.
Ideal for BOSCH alternators with free wheel pulleys.

11pc Electronic Fuel Injection Test Light Set
Crucial for electronic fuel injection systems
Systems covered :
TBI - Ford | GM | Geo
PFI - Bosch | GM
SCPI - GM / Multec 2 / 1987
GM 1982 equipped vehicles.

8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.

Wi-Fi Endoscope - 5V DC
Suitable for pipeline inspection, air conditioning unit inspection,
venting systems and automobile applications.
Support System : IOS / Android
Camera Outer Diameter : 7.9mm
Image / Video Resolution : 2560 x 1440 / 1280 x 720.
Focal Length : 2 - 10cm
Frame Rate : 20fps
Viewing Angle : 70 degrees
Lights : 8 adjustable white LEDs

Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.

Petrol Engine Compression Test Set
Thread Chasers : M10 | M12 | M14 | M18
with Dual Scale Gauge for direct and indirect injection engines.
For use on engines with deep seated plug ports with difficult access.
Built-in pressure relief valve enables repeat tests without dismantling.

Automatic Wave Box Pressure Meter
Diagnose problems with oil pressure in virtually all diesel and petrol engines.
Dual scale gauge : 0 - 500psi / 0 - 35bar
Hose : 1800mm 1/8 NPT oil proof.
Includes 1/4 and 3/8 NPT Adaptors.

2pc Brake Caliper Seal Groove Cleaner Set
200mm Long with different heads
For removing dirt and debris from seal ring grooves.

VAG Fuel Pump Sprocket Puller
For the removal of the high pressure pump sprocket.
on 1.6L and 2.0L TDi common rail diesel engines.
Also for removing the Pump Pulley on
1.6 / 2.0 - 6 cylinder TDi common rail diesel engines
OEM Code : T40064

46pc Harmonic Balance Puller Set
Removes Harmonic Balancers / Gear Pulleys
Steering Wheels and Crank Shaft Pulleys
Zinc Plated Yoke and Bolts
5in. Pressure Screw
Small Cantering Adaptor
Large Cantering Adaptor
Flat Shaft Adaptor

BMW Single VANOS Camshaft Timing Kit
For setting engine timing during chain removal and installation.
Compatible with some BMW 4 and 6 cylinder none VANOS engines
With Camshaft Locking Plate
VANOS Turning Wrench
and Top Dead Centre Pin

BMW Timing Tool Set
For engine codes : N51 | N52 | N53 | N54
With Camshaft and Crankshaft Locking Tools
Transmitter Wheel Locking Tool.
Suitable for a wide range of models.

BMW Timing Tool Set
for N63 / N74 / S63 Models
N63 engines up to September 2012.
N74 V12 Engines which are not very common.
S63 engines prior to September 2011.

BMW / Mini Timing Tool Set
for BMW / Mini One 2001-06
Mini Cooper 2001 - 06 and Mini Cooper S 2002 - 06
Set contains Camshaft Sprocket Holding Tool
Engine Support Bracket and Tension Assembly Tool
This kit is specifically designed for petrol engines on pre 2009 Mini One / Cooper and Cooper S models.
Engine Codes : W10 | W11 | N14

BMW / Mini / PSA Timing Tool Set
For timing 1.4 & 1.6 Valvetronic direct injection chain drive petrol engines
fitted in BMW Mini / Citroen and Peugeot vehicles.
With Camshaft Locking Tools
Camshaft Alignment Clamp and Crankshaft Setting Pin.
M6 Setscrews Chain Tensioner.
Mini Cooper / Coupe | Citroen C4 | Peugeot 207 / 308 / 3008 / 5008

Chrysler Timing Tool Set
for Chrysler Belt Drive Engines
With - Camshaft Locking Pins
Flywheel Locking Pins
Balance Shaft Locking Pins
Tension Adjustment Wrench
Applicable to : Voyager | Grand Voyager
Jeep Cherokee / 01 - 08 | LDV Maxus / 05 - 08

Ford Timing Tool Set
for Ford 1.6 TI-VCT Duratec Engines
For timing belt replacement on 1.6 Ti-VCT Duratec EcoBoost Engines.
With Camshaft / Crankshaft and Flywheel Locking Pins
used to lock the camshafts in their timed position
when removing belts and pulleys during servicing.
Suitable for many other petrol and diesel Ford engines.

JLR Timing Tool Set
For Jaguar Land Rover 2.0 Chain Drive Petrol Engines
With crankshaft pulley and crankshaft sensor positioning tools

Ford Timing Tool Set
For locking and checking the camshaft on -
Ford / Jaguar 2.0L EcoBoost / Duratec Petrol Engines.
Land / Range Rover 2.0L GTDI and Si4 Diesel Engines.

Mercedes Timing Tool Set
Timing Chain Mounting Tool Set
for Mercedes-Benz M651 Diesel Engines
Allows precise positioning by preventing the timing chain skipping
and the camshaft sprockets moving when replacing the timing chain
without removing the camshaft sprockets.
Camshaft - Adjusting Tool and Special Wrench
Crankshaft Turning Tool
Sprocket Feet Shaft plus Screws
Timing Chain Guide Tool plus Screws

Mercedes Timing Chain Riveting Tool
For renewing and riveting timing chains on Mercedes-Benz Vehicles
Dismantling the timing chain case is often not required
as the new chain can be fed through using the existing chain.
Suitable for models with Duplex and Simplex timing chains with 4mm chain bolt.

Mercedes Timing Tool Set
Camshaft Alignment Tool Set
For Mercedes-Benz M271 Petrol Engines
Used for engine timing and belt changing.
Also other camshaft related servicing

Vauxhall / Opel Timing Tool Set
for 1.9 CDTI Diesel Engines
Timing and Locking Tool Kit for Camshafts and Crankshafts.
For Servicing and adjusting Timing belts -
includes Flywheel Holding Tool
Applicable to : 1.9 CDTI / TID / TTID & 2.0 CDTI / ECOFLEX

Renault Timing Tool Set
for 1.4 / 1.6 / 1.8 / 2.0 16V Belt Drive Engines
Suitable for timing belt replacement on
Renault and some Nissan and Vauxhall / Opel vehicles.
With Camshaft Rule and Locking Pins.
OEM Codes : MOT1489 | MOT1496 | MOT1054

VAG Timing Tool Set
for Porsche Cayenne and Panamera V8 Engines
Also Porsche Cayenne utilizing the M97/01 V8 engine.
For camshaft timing on Direct Fuel Injection /
Turbo and Normally-aspirated Engines
Allows TDC Timing during servicing the
Camshafts / Cylinder Head / Timing Chain
or Variable Valve-timing Cam Phasers.
Cayenne V8 up to 2007 and Cayenne and Panamera 2008 onwards

Volvo Timing Tool Set
for B4204 8 Speed Transmission Engines.
For aligning the camshaft and crankshaft and
working on valve drive and renewing the cylinder head gasket.
Belt Pulley Counter Holding Tool
Crankshaft Wheel Puller
Radial Seal Ring Mounting Tool
Camshaft Sprocket Tool
Camshaft Alignment Tool

Antifreeze and Coolant Tester
Easy read scale and pointers.
Calibrated in degrees C and F.
Tests ethylene glycol strength and includes temperature adjustment scale for accurate interpretation of mixture strength.
Tests Ethylene Glycol strength while the engine is hot or cold.
Composite body and rubber bulb for workshop durability.

8pc Block Tester Kit
Detects exhaust gasses in the radiator
and checks for gasket damage also cracked or warped cylinders.
Works with Petrol | Diesel and Gas powered vehicles.
Use with combustion leak detector fluid - not included.
Suitable for use with sets - CT1585 and CT3380.

Tube and Trim Cutter
With Multi-Angle Anvil and replaceable Utility Knife Blade.
Anvil Markings for 45 to 120 degree Angles.
Ideal for cutting Window Gaskets
Plastic Trim | Tubing and Conduit.

1.5 litre Fuel and Fluid Extractor
For AdBlue / Antifreeze / Brake Fluid / Diesel / Oil / Water.
Also for transmission of fluid / gear oil and engine oil / not ATF.
Suitable for fluid suction and supply during vehicle service.
Clear body for observing fluid content.
Features cap to avoid dripping.
Capacity : 1.5 litre.

8L Pneumatic Auto Transmission Fluid Extractor and Refill Kit
with 13 Adaptor Set for Audi / Ford / Mercedes / VW.
Extract / transfer and dispense fluid quickly and cleanly
With Pre-set Safety valve for automatic shut-off.
Pressure gauge to read and control pressure.
2 way control valve for dispensing more safely.
13 one touch adaptors for automotive fluid transfer.
Screw valve to switch from extractor to dispenser.
High flow control valve to extract fluid more efficiently.

24 piece Engine Oil Filler Set with Rotation Handle
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adaptor for wide application range.
Colour coded plastic adaptors for oil filler access.
Special angle extension with swivel feature for hard to reach places.
Contains 19 specific adaptors for leakage-free connection.

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

24 Litre Pneumatic Oil Extractor
Degree of Vacuum : 0 - -0.08mpa
Working Pressure : 8 - 10bar
Working Oil Temperature : 40 - 60 degrees C
Suction Speed -
0.8L/min - Hose diameter : 3.5mm
1.0L/min - Hose diameter : 4.5mm
1.6L/min - Hose diameter : 6.5mm
Designed to extract waste oil and fluids.

12pc Oil Drain Plug Key Set
For use with 3/8in.Dr Ratchet
Hex keys : 8 | 9 | 10 | 12 | 14 | 17mm | 3/8in.
Square Keys : 8 | 11 | 13mm | 3/8in.
With 3/8in.Dr Sliding T-Bar.
Applicable to Oil Sumps on most modern vehicles

15oz / 445cc Grease Gun
Die Cast Pump Head with Air Bleed
Can be used with Cartridge or Bulk Grease
Supplied with Rigid and Flexible Tubes

11pc Clutch Alignment and Adjustment Tool Set
Suitable for a wide range of vehicles and some light commercial vehicles.
Screw action provides fast adjustment for required hub diameter.
8 interchangeable spigot adaptors aid close alignment.
Adaptors : 12 | 14 | 15 | 16 | 17 | 18 | 19 | 20mm diameter.
Expanding mandrels : 15 - 19mm | 20 - 26.6mm | 23 - 36mm diameter.

Fast Fit Micro Puller 19 - 45mm
Supplied with thrust shaft extension
Capacity : 1 ton
Reach : 73mm
Puller Reach : 19 - 73mm / Min-Max
Puller Spread : 19- 45mm / Min-Max
Designed for the fast and safe removal of small bearings.
Also alternators / generators / domestic appliances / power tools and pumps.
Spring loaded and drop-forged legs are secured around the bearing or gear
by a screw collar to prevent slipping and subsequent damage or injury.

Adjustable Seal Puller
with 2 Hook Shapes
With rotating head for removing various oil and grease seals

Inner Tie Rod Installer / Remover Tool Set - 1/2in.Dr
Contains 12 SAE and Metric crowfoot adaptors
Sizes : 1-13/16 | 1-? | 1/5/16 | 1-3/8 | 1-7/16 | 1-1/2in.
29mm | 32.5mm | 33.6mm | 38.4mm | 40mm | 42mm
For inner tie rods that are inaccessible to adjust with a normal spanner.
The long socket slips over the tie rod end allowing the crowfoot adaptor
to engage with the fastener for easy removal and installation.
The inner tie rod can be removed and installed without removing the rack.

11pc Special Socket Set
for Castellated Lock Nuts
1/2in.Dr Sizes : 22 - 75mm
4 Tooth Sockets for removing castellated lock nuts
found on ball joints / axles and other applications.

Turnbuckle for Shock Absorber Top
Unique and comprehensive set of tools
for servicing spring or strut shock absorbers.
Suitable for a wide variety of vehicles
in conjunction with spring compressors.
Chrome Vanadium sockets and
Strut Nuts with 22mm hex drive.
Specialist bits with 10mm hex drive
Go-Thru Ratchet : 19 | 22mm.

Brake Fluid Tester
For accurately checking the quality of brake fluid.
With 5 LED?s to indicate percentage of water in the brake fluid.
Requires LR03 AAA 1.5V Battery / not included.
Automatic Power Off.

6pc Brake Bleed Wrench Set
Sizes : 7 | 8 | 9 | 10 | 11 | 12mm - 12 point
Combined Wrench / Socket and Nipple Connector.
Ideal for bleeding brake and hydraulic clutch systems without removing the wheels.
1.2M silicon hose with check valve for safety operating.
For universal bleeder nipples.