Products which have revised specifications, or changed and up-dated in some way from original stock items
CT1718
Socket and Bit Tool Set - 171pc
171pc Socket and Bit Set - 1/4 | 3/8 and 1/2in.Dr
1/4in.Dr : 4 - 14mm | 6 - 10mm Deep | E4 - E8 Star
3/8in.Dr : 10 - 19mm | 10 - 15mm Deep | E10 - E18 Star
1/2in.Dr : 10 - 32mm | 16 - 22mm Deep | E20 . E24 Star
Screwdriver Bits : Flat | Hex | Phillips | Pozidriv | Star
CT4043
Torque Wrench - 1/2in.Dr
Digital Display Torque Wrench
10 - 200Nm with 10 Digital Presets.
530mm Long - 1/2in. Drive with 72 Teeth mechanism.
Units : Nm / ft-lb / in-lb / kg-m with 2 percent accuracy.
Auto shut off : 150 seconds with Audible alert mode.
Requires 3 x AAA Batteries / not included.
Ideal for industrial / automotive use.
CT4042
Torque Wrench - 1/2in.Dr
Digital Display Torque Wrench
17 - 340Nm with 10 Digital Presets.
650mm Long - 1/2in. Drive with 72 Teeth mechanism.
Units : Nm / ft-lb / in-lb / kg-m with 2 percent accuracy.
Auto shut off : 150 seconds with Audible alert mode.
Requires 3 x AAA Batteries / not included.
Ideal for industrial / automotive use.
CT3393
Automotive Battery Charger / Starter
Heavy-Duty Smart Trolley Battery Charger & Starter
LCD Display for easy reading with Slow and Fast Charge modes.
Input : 220V - 240V AC | 50 - 60Hz | 13A
Output : 12V DC - 10A /30A / 60A
Output : 24V DC - 5A /15A / 30A
Engine-cranking : 12V DC / 200A / 5s on / 180s off
Protected against Overcharge / Short Circuit and Reverse Polarity.
Supplied with Smart Clamp Leads.
Suitable battery types : STD | AGM | GEL | LifeP04
CT3219
Clamp Meter - Digital
Automotive Clamp Meter
Digital LCD Screen Max. reading : 1999
Overload Protection | Auto Ranging | Zeroing Function
Max. Measurable Conductor : 25mm diameter
Voltage AC / DC : 600V
Current AC : 20 / 200 / 600A
Resistance : 2k Ohms
Continuity : Yes
2 x 3V CR2032 Batteries
CT4884
Diesel Injector Repair Kit
8pc Common Rail Diesel Injector Repair Kit
For repairing common rail diesel injectors Bosch / Siemens and Denso.
Set comes with all necessary sockets to open up defective injectors :
Injector ball valve lapping tools
Hex Bits : 6.6mm | 7.6mm
Denso common rail injector valve seat removal tool
8 Sided socket for Bosch common rail injectors
Inside fixing removal tool for Siemens common rail injectors.
CT3620
Compression Test Kit
Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.
CT1865
Compression Test Set - Petrol
Petrol Engine Compression Test Set
Thread Chasers : M10 | M12 | M14 | M18
with Dual Scale Gauge for direct and indirect injection engines.
For use on engines with deep seated plug ports with difficult access.
Built-in pressure relief valve enables repeat tests without dismantling.
CT2939
Timing Tool Set - BMW / Mini
BMW / Mini Timing Tool Set
for BMW / Mini One 2001-06
Mini Cooper 2001 - 06 and Mini Cooper S 2002 - 06
Set contains Camshaft Sprocket Holding Tool
Engine Support Bracket and Tension Assembly Tool
This kit is specifically designed for petrol engines on pre 2009 Mini One / Cooper and Cooper S models.
Engine Codes : W10 | W11 | N14
CT3581
Timing Tool Set - BMW / Mini / PSA
BMW / Mini / PSA Timing Tool Set
For timing 1.4 & 1.6 Valvetronic direct injection chain drive petrol engines
fitted in BMW Mini / Citroen and Peugeot vehicles.
With Camshaft Locking Tools
Camshaft Alignment Clamp and Crankshaft Setting Pin.
M6 Setscrews Chain Tensioner.
Mini Cooper / Coupe | Citroen C4 | Peugeot 207 / 308 / 3008 / 5008
CT4649
Timing Tool Set - Ford
Ford Timing Tool Set
for Ford 1.6 TI-VCT Duratec Engines
For timing belt replacement on 1.6 Ti-VCT Duratec EcoBoost Engines.
With Camshaft / Crankshaft and Flywheel Locking Pins
used to lock the camshafts in their timed position
when removing belts and pulleys during servicing.
Suitable for many other petrol and diesel Ford engines.
CT5430
Timing Tool Set - Mercedes / M651
Mercedes Timing Tool Set
Timing Chain Mounting Tool Set
for Mercedes-Benz M651 Diesel Engines
Allows precise positioning by preventing the timing chain skipping
and the camshaft sprockets moving when replacing the timing chain
without removing the camshaft sprockets.
Camshaft - Adjusting Tool and Special Wrench
Crankshaft Turning Tool
Sprocket Feet Shaft plus Screws
Timing Chain Guide Tool plus Screws
CT4062
Timing Chain Riveting Tool - Mercedes
Mercedes Timing Chain Riveting Tool
For renewing and riveting timing chains on Mercedes-Benz Vehicles
Dismantling the timing chain case is often not required
as the new chain can be fed through using the existing chain.
Suitable for models with Duplex and Simplex timing chains with 4mm chain bolt.
Cannon Tools Limited • 20 Station Road, Rowley Regis, West Midlands, B65 0JU, United Kingdom
T +44 (0) 121 561 6760