VAG Fuel Line / Hose Clip Pliers
for use on small self-tightening hose clips with flat 3-terminal ends
found on fuel lines / cooling and water hoses.
Hardened - non-warping burnished self-opening spring jaws.
Suitable for Audi / Seat / Skoda and Volkswagen vehicles.
Maximum jaw opening : 24mm
Total length : 190mm

VAG Fuel Line Pliers
Rotating Jaws - ideal for tight areas.
For use on TAG type hose clips fitted to VAG fuel lines.
Applicable to : Audi / Seat / Skoda / Volkswagen
Spring assisted grip.

Fuel Feed Pipe Pliers
For Removal and Replacement of Fuel Line Connectors on In-Line Fuel Filters
Suitable for Alfa / Audi / Fiat / Lancia / Volvo / Volkswagen

Fuel Feed Pipe Pliers
For quick release fuel feed pipe line connectors.
Applicable to :
GM | Fiat / Chrysler | VAG vehicles

Fuel Line Pliers
Audi | Fiat | GM | Mercedes | VW
For removal and replacement of the connections on the in-line fuel filter.
Required when replacing the fuel filter or during engine repairs.

85pc Assorted Leak Off Connectors
Suitable Connectors for Bosch / Siemens / Delphi Injectors.
T Type for PA Tube
T Type for Rubber Tube
L Type for PA Tube
Offset for Rubber Tube
90 degree for Rubber Tube
102 degree for PA Tube
Snap Lock Delphi Type for PA Tube

5pc Fuel Pump Water Drain Valve Plugs
For Ford 6.7 | 6.7L Diesel HFCM
Ford Truck / Pickup 2017-2022
F250 / F350 / F450 / F550 Super Duty 6.7L V8 Diesel Engines.
Easy Installation.
OEM Code : HC3Z-9J305-A

95pc Fuel Pipe and Connector Set
Nylon fuel pipes / connectors / hose and clips in a handy organiser.
55 Fuel Pipe Quick Connectors.
9 Straight Couplings.
Nylon Pipes : 6 x 340mm | 8 x 340mm | 9.5 x 340mm.
Rubber Hose : 7.5 x 200mm | 12 x 200mm.
Ear Clips : 15-18mm | 17-20mm.
With Stainless Steel Pipe Cutter.

Button Connector Pliers with Flexible Cable
Suitable for use with Fuel Pipe and Connector Kit - CT4912
650mm long with Jaw range : 3mm to 32mm.
For the removal of button connectors on fuel systems / gearboxes /
brake fluid / power steering and air conditioning systems etc.

Fuel Line Disconnect Tool
For Ford 6.0L Engines
Used to disconnect the high pressure oil rail supply line
from the fuel rail when removing fuel injectors.

7pc Pipe Disconnect Set
Pipe Connector Loosening Clip Set
for 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4 | 7/8in. Diameter Pipes
Quick connecting sleeves in air conditioning systems and fuel lines

8pc Fuel Line Disconnect Kit
with rubber rings
For Air Conditioning / Fuel and Transmission Lines

3pc Fuel Line Disconnect Set
Design for uncoupling quick release fittings on fuel lines on most vehicles

Fuel Line Tool for Mini Cooper S
For removing the low pressure fuel Line
that supplies the high pressure fuel pump.
Prevents damage to the quick connect coupler.
Fits models with N14 | N18 Engines between 2007 and 2012
OEM Code :

27mm Fuel Filter Socket - 1/2in.Dr
For Removing and Fitting Diesel Fuel Filters
Applicable to 2.0 / 2.2HD engines
in Citroen / Ford / Mitsubishi / Peugeot / Volvo vehicles

Diesel Fuel Filter Socket - 32mm
32mm with 1/2in.Dr and 6 point profile.
For Ford Transit Custom MK8 2.0TDCI from 2016.
For the removal of the diesel fuel filter element.
Ford filter : 2 005 485.

Vauxhall / Opel Fuel Filter Tool
Diesel Fuel Filter Removal Kit for GM vehicles

Diesel Fuel Filter Tool Kit
1/2in. Drive x 115mm ID
For JTD / CDTi / DDiS / TiD / VCDi / Hdi
For changing the fuel filter insert in
Chevrolet / Citroen / Fiat / Saab / Suzuki / Vauxhall / Opel
Preventing damage to the housing assembly.

VAG Diesel Fuel Filter Cap Installation Tool
Suitable for VAG - Audi / Seat / Skoda and VW
diesel vehicles with UFI fuel filter units.
This tool allows for the torsion-free mounting of fuel filter caps
on fuel filters required when replacing the fuel filter cartridge

VAG Diesel Fuel Filter Lever
Suitable for Audi / Seat / Skoda and VW
For the re-assembly of the filter housing without damage to the gasket.
For 2.0 TDI common rail engines equipped with UFI paper diesel fuel filter elements.
Helps to ensure the correct fitting of the fuel filter housing top.
Multi-adjustable lever provides ample position variations.

Adjustable Fuel Tank Lid Remover
1/2in.Dr Universal
Applicable to European and Japanese vehicles.

Fuel Tank Lid Wrench
Mercedes M-class W164 | W251
1/2in.Dr 22 point Slotted wrench
for lock ring on fuel pump sending unit.
Applicable to :
Mercedes M-class W164 from 2005 to 2011
and R-Class W251 Chassis.

AdBlue Tank Cap Remover for PSA Group vehicles
Ideal for removing the tank cap when stuck due to urea crystallisation.
Also allows correct tightening to ensure proper sealing of the system.
Applicable to Citroen / Peugeot vehicles.
For

Fuel Tank Filter Lid Wrench - 3/8in.Dr
Size : 109mm / 8 Ribs
For removing and installing the fuel filter cap when replacing the fuel cartridge.
Helps to avoid component damage when working on fuel systems.
Suitable for Peugeot / Citroen / Renault.

Fuel Tank Filter Lid Wrench - 1/2in.Dr
Size : 155mm / 12 Ribs
For removing and installing the fuel filter cap when replacing the fuel cartridge.
Helps to avoid component damage when working on fuel systems.
Suitable for Volvo - XC60 | XC70 | S40 | S80 | V50 | V30

Fuel Tank Locking Ring Tool - Volvo
Size : 106mm | 18 points | 1/2in.Dr | 22mm Hex Dr
To remove or install the fuel tank lid on Volvo Vehicles
Applicable to : S60 / S80 / V70 / V70XC / XC70 / XC90
OEM Code : 9995720

2-Leg Fuel Tank Sender Spanner
Range - 110 - 170mm Diameter
Use with a 24mm Spanner or Socket
For removing and re-fitting Tank Sender Mounting Rings.

3-Leg Fuel Tank Sender Spanner
Range - 75 - 160mm Diameter
Use with a 24mm Spanner or Socket
For removing and re-fitting Tank Sender Mounting Rings.

3-Leg Fuel Tank Sender Wrench
Range - 89 - 170mm Diameter
Use with a 15mm Spanner or Socket
For removing and re-fitting Tank Sender Mounting Collars / Rings.
Universal use

Vacuum and Fuel Pump Pressure Tester
80mm gauge with rubber bumper.
Test Pressure up to 10psi
with 14 and 17mm manifold adaptors.
Test mechanical and electrical fuel pumps.
Check Fuel lines / Vacuum chokes and Heating.
Compatible with most vehicles.

Fuel Pressure Test Kit
Multi-meter | Leads | Test gauge
CM TBI adaptor | Banjo bolts
Angle adapter | multi-meter clips
1/4 and 5/16 hose and Clamps
Ford Schrader adaptor

Diesel High Pressure Pump Test Kit
Essential tool for diagnosing the fuel circuit of diesel common rail systems.
With high pressure gauge / flexible hoses / dummy pump regulator
and injector pipe blanks for a variety of tests :
Engine cranking / running pressure test
Maximum pump pressure test
Pump pressure regulator test
Injector leakage test

Motorcycle Compression & Fuel Pressure Gauge Set
3 Gauges with Connectors and Adaptors for
testing motorcycle compression and fuel pressure.
Compression : 0 - 300psi | 0 - 2000kPa.
Fuel Pressure : 0 - 7bar | 0 - 1000psi.
Fuel Low

7pc Compression Test Kit
For checking the compression of single cylinders on Diesel and Petrol engines.
Suitable for most Vehicles and Motorcycles with Adaptors for :
M10 x 1.00 | M12 x 1.25 for motorbikes
M24 x 2 for Diesel Engines
M12 x 1.25 with 7 mm hole for VW Diesel engines
Multi-Valve Engines
M14 x 1.25 and M18 x 1.5
Maximum pressure : 6.8bar or 100psi.

3pc Petrol Engine Compression Test Kit
Fitted with 65mm diameter gauge
with 4 scales - Psi | Bar | kg/cm | kPa.
150mm Quick coupling with cone adaptor
320mm flexible adaptor with
14 and 18mm screw in adaptors.
Supplied with instructions.

Petrol Engines Compression Tester
65mm Gauge with dual scale : 0 - 300psi / 0 - 2000 kpa
Thread Size : M10 x 1.0 | M12 x 1.25 | M14 x 1.25 | M18 x 1.5
Straight and Angled Push-on Connectors
Flexible Extension - 400mm

Petrol Engine Compression Tester
For quick and easy diagnosis of combustion loss in -
Intakes / exhaust valves or cylinder head gaskets.
Adapters : M12 | M14 x 1.25
Hose adapters and extension with quick coupling.
Twin Gauges with air regulator.

Engine Compression Test Kit
Compression pressure testing up to 50 bar.
Suitable for most petrol and modern HDI / TDCI
pump injector and older diesel engines.
Quick couplings for straight or angled versions.
Glow plug adaptors | Spark plug adaptors M10 / M12 / M14 and M18.
Injector adaptors M20 / M22 / M24 and stanadyne injectors
Additional pressure gauge for pressure drop test.
Suitable for most cars / trucks / buses / agricultural and marine engines.

14pc Diesel Compression Test Set
Supplied with Gauge and Adaptors
Gauge reads 0-1000psi and 0-70bar with 368mm Hose and Release Valve

Diesel Engine Compression Test Set
for Direct and Indirect Injection
Dual Scale Gauge
Glow Plug Adaptors
Dummy Injectors
Stanadyne Dummy
Replacement Seal and Washer Set
90 Degree Elbow

Petrol Engine Compression Test Set
Thread Chasers : M10 | M12 | M14 | M18
with Dual Scale Gauge for direct and indirect injection engines.
For use on engines with deep seated plug ports with difficult access.
Built-in pressure relief valve enables repeat tests without dismantling.

4pc Pipe Line Stopper Kit
Sizes : Banjo | 3/8 | 5/16 | 1/2 Inch
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with an

4pc Pipe Line Stopper Kit
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Sizes - Banjo | 3/8 | 5/16 | 1/2 Inch