60pc Nylon Washer / Fibre Gasket Set
Nylon : 1/2in. | 12mm | 14mm
Fibre : 1/2in. | 16mm | 18mm | 20mm
Suitable for Oil Drain Plugs

120pc Ford Drain Plug Gasket Set
20 x M12 x 21 x 2.5
20 x M12 x 22 x 2
20 x M12 x 25 x 1.2
20 x M14 x 22 x 2.5
20 x M14 x 24 x 2
20 x M14 x 25 x 1.5

Heavy Duty Drill Pump
Suitable for Oil and Fluids.
6mm Drill Shaft.
1/2inch diameter Hose.
Max. Output - 1500 L/ph at 3000 rpm
Max. Pumping Height - 15M
Max. Output Pressure - 3 bar at 3000 rpm
Max. Self-priming to 300cm

12 Volt Oil Pump / Extractor
Suitable for diesel heating or motor oil.
Connect to 12 Volt battery using crocodile clips.
Will remove oil using access through the dipstick port.
Complete with all necessary accessories.
NOT suitable for fuel use or flammable liquids.
Ideal equipment for quick and clean oil-changes.

4L Manual Oil and Fluid Vacuum Extractor
For Engine Oil and Water supplied with Funnel and
PVC Tubes : 8mm dia x 1000mm | 10mm dia x 1300mm
For removing engine oil through the dipstick tube.

9L Manual Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery
also suitable for low-viscosity fluids such as water.
Automatic safety shut off mechanism when the tank is full.
Supplied with 3 tubes : 4mm /

9L Pneumatic Fluid Extractor
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
May be used with most standard workshop air compressors.
Automatic safety shut off mechanism when tank is full.
Simple Push Button Use - extract liquids from tanks quickly and easily.
Working Pressure : 70 - 170psi
Air Inlet : 1/4in.
Air Consumption : 5cfm

9 Litre Manual / Pneumatic Fluid Extractor
This Fluid Extractor may be used in conjunction with a compressor
or manually when an air line is not available.
Suitable for extracting oil from vehicles and industrial machinery.
Also suitable for low viscosity fluids such as water.
With 6 and 10mm diameter suction probes and brake bleeding hose.
Working pressure : 70 -170psi
Air inlet: 1/4in.
Air consumption: 5cfm

Oil Can and Lubrication Gun

1/4 pint Oil Can

1/2 pint Oil Can

1 pint Oil Can

2 litre Measuring Jug
with Flexible Spout and Cap
PE construction suitable for Oil

5 litre Clear Oil Jug
with Flexible Spout and Cap

5 litre Fluid / Oil Measuring Jugs
Blue / Green / Red / Yellow coloured coded dust caps
to identify contents and prevent contamination
Polyethylene with removable / flexible spout.
Screw Lids and Spouts for dust and pollutant protection
also prevents drips and spillages
Makes lubrication work easier / faster / safer and cleaner.
Suitable for engine oil / brake fluid /
battery fluid and other non-acidic fluids.

2 litre Blue Oil Can
For Oil and other Fluids
Material : Pe

6 litre Blue Oil Can
For Oil and other Fluids
Material : Pe

Universal Oil Funnel Set
For Hands-free working.
Funnel connects to oil filler neck.
No unsafe spills on engine or floor.
Transparent lower chamber displays oil flow.
Pliers allow self adjustment to the oil filler neck for univers

8pc Oil Funnel and Adaptor Set
For fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Plus Offset Extension Tube with swivel feature for hard to reach places.

8pc Engine Oil Filler Set
For fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Plus Offset Extension Tube with swivel feature for hard to reach places

24 piece Engine Oil Filler Set with Rotation Handle
Allows for fast oil filling without spillage.
Great for many late model vehicles with internal baffles.
2 litre funnel fits adaptor for wide application range.
Colour coded plastic adaptors for oil filler access.
Special angle extension with swivel feature for hard to reach places.
Contains 19 specific adaptors for leakage-free connection.

250mm Oil Drum Funnel with Filter
Filters oil and drains direct into oil drum.
Suitable for draining waste oil or draining unused oil into the drum.
Material : PP
Max Diameter : 250mm
OA Height : 210mm
With 2in. BSP / DIN 61 adaptor for most oil drums.

Truck and Trailer Wheel Pan

Oil Drain Pan - 2 litre for Motorcycles

Drip Tray
940 x 630 x 30mm
Manufactured from 1mm plastic
Ideal when transferring fluids to avoid workshop floor contamination.
Also protect your drive or garage floor from oil and antifreeze spillage
which can be harmful to pets.

Stainless Steel Drip Tray
600 x 400mm / 48mm deep.

8L Oil Drain Pan
Easy to clean durable plastic construction
with 8 Litre capacity ideal for antifreeze and oil.
Wide pan with pouring lip for clean disposal of fluids
plus shallow sides to allow easy positioning under vehicle.
Suitable for DIY use or the professional garage mechanic.

16 litre Oil Drain Pan
Ideal for the Professional and Enthusiast Mechanic

10 litre Fluid Draining Tank
for Oil or Water
For professional mechanics or the DIY the user.
Concave drain surface and large spout with
secure screw cap prevents any loss while transporting fluids.
Strong durable plastic with moulded handles top and bottom.

2-in-1 Oil Drain Pan & Tool Caddy
Combined 8 litre oil drain pan and mobile tool caddy.
Use when changing oil or alternatively to keep tools organized while under car.
With splash guard to hold drain plug.
Drain pan capacity : 8L
Load capacity : 22.5Kg

Transmission Oil Changing Machine
Cycle Cleaning with Equal Oil Change
Rated Voltage : 220V - 240V AC
Rated Frequency : 50 / 60Hz
Pressure Gauge Range : 0 - 150psi
Filter Accuracy : 5um
Pipe Length : 2.5M
No Load Speed : 0 - 3000 rpm
Model : ATF-20DT

24 Litre Pneumatic Oil Extractor
Degree of Vacuum : 0 - -0.08mpa
Working Pressure : 8 - 10bar
Working Oil Temperature : 40 - 60 degrees C
Suction Speed -
0.8L/min - Hose diameter : 3.5mm
1.0L/min - Hose diameter : 4.5mm
1.6L/min - Hose diameter : 6.5mm
Designed to extract waste oil and fluids.

Pneumatic Waste Oil Extractor
for engine oil and gear oil.
Tank capacity : 80L
Degree of vacuum : 0 - 0.8bar
Operating air pressure : 8 - 10bar
Volume of oil collecting pan : 10L
Dipstick probes : 6 x 4.5mm | 8 x 6.5mm
Draining and Suction Hoses : 1.5m
Operating temperature : 60 - 100 degrees C

500cc Oil Suction Gun
Oil Extractor Pump
Removes and replaces any non-corrosive liquid.
Perfect for Transmissions / Differentials / Gear Cases / Crankcases.
No priming necessary.
Knurled thick wall barrel for secure grip.
12in. / 300mm Flexible Hose.

500cc Suction Gun
Fluid Extractor Pump
Suitable for Antifreeze, Gearbox and Engine Oil etc.
Features an outlet valve and an inlet valve for easy transfer in one pump.
Overall length : 330mm / without hose
Hose Length : 1.2M
Hose outer diameter : 12.5mm
Hose inner diameter : 9.5mm

See-Through Suction Gun
Ideal for transmissions / differentials and gearboxes.
Transparent barrel to easily view fluids to inspect and control flow.
For use with any non-corrosive liquids.
Flexible hose for hard-to-reach areas.
Capacity : 550ml
Hose Length: 300mm
Hose Diameter : 13mm External
Hose Diameter : 10mm Internal

Transmission Oil Hand Pump
7L Reservoir with 15 Adaptors
Suitable for Manual and Automatic Transmissions.
Viscosity range : SAE0 to SAE140
Capacity : 80cc per cycle
Includes 15 adaptors for :
BMW / Ford / Honda / Hyundai / Kia / Mercedes / Mini / Nissan / Toyota / VAG / Volvo Vehicles

Grease or Hydraulic Oil Hose Reel
50ft - 3/8in. High pressure : 2250psi
High tensile steel wire braid Reinforcement
Steel construction for long life in industrial and automotive industries
2 supporting arms and galvanized base
4 direction non-snag rollers reduce hose abrasion
Wall / ceiling or floor mount
Hose material - S.A.E 100R1AT
Temperature : 40 - 100 degrees C

Audi A6 Automatic Transmission Oil Dipstick
Applicable to Audi A6 / 100 models without dipstick
4A | C4 / 1990 - 1994
44 | 44Q | C3 / 1982 - 1990
43 | C2 / 1976 - 1982
C1 / 1970 - 1976

Oil Dipstick for Audi / VW
For Audi : A4 | A5 | A6
with 1.8 / 2.0 TFSI | 3.0 / 3.2 FSI | 2.0 / 2.7 / 3.0 TDI engines.
Applicable on Audi engines fitted with electronic oil level systems,
also can be used to assist the calibration of th

Oil Dipstick for Mercedes Trucks
Designed to measure the transmission oil level.
Applicable : BENZ trucks.
Spring length : 860mm

Mercedes Benz Gearbox Oil Dipstick Gauge
for measuring transmission oil
Vehicles have no oil gauges so necessary when changing oil.
1220mm long for Gearbox Oil on 722.6_L/G/P/V

4pc Oil Dipstick Gauge Set for Mercedes Benz
4 dipsticks for measuring engine and transmission oil
Vehicles have no oil gauges so necessary when changing oil.

Gearbox Oil - Green : 920mm long
Gearbox Oil - Red : 1220mm long
Engine Oil - Blue : 930mm long
Engine Oil - Yellow : 930mm long

Sump Plug Removal Tool
for the plastic sump plugs found on VAG vehicles.
with 2.0L TDI GEN III Engines
on Audi | Golf Mk VII | Seat Leon.
May also be used on the cam cover for the latest
VAG 1.6 and 2.0 twin cam diesel engines

Oil Drain Plug Key - VAG
1/4in.Dr Plug Removal Tool
Specifically for the plastic sump plugs found on the latest VAG vehicles.
Applicable to VAG 2.0 litre 4 cylinder TDI GEN III engines
Audi | Seat Leon / 2013 | VW Golf Mk VII / 7
This plug is also suitable for the cam cover on the latest
1.6 and 2.0 twin cam diesel engines found in the VAG range.

Oil Drain Plug Wrench - VAG
For use on plastic oil drain plugs
Found on Audi | Seat | Skoda | VW vehicles
OEM : T10549

5pc Plastic Sump Plug Driver Set
Special set for the removal of drain plugs with
Custom-fit profile to ensure No damage to plastic plugs and sumps.
3/8in.Dr T-handle : 100mm.
Bit Holder : 1/4in. x 3/8in.
Special profile bits for : BMW / PSA / VAG vehicles.

9pc Oil Sump Plug Keys
Special Profile Set for assembly and disassembly of
plastic oil drain screws on plastic oil sumps.
Supplied with 3/8in.Dr T-handle or use with 17mm Socket.
For manual operation - do not use power tools.
Applicable to : Ford / PSA / BMW / VAG / Mercedes / DAF / MAN / GM.

Oil Sump Plug Key
8 and 10mm Square Key
For Differentials | Filters
Gearboxes and Sump Plugs

Oil Service Wrench
10mm 8 Point Star and 8mm Square Oil Service Tool.
For oil filler / drain plugs on gearbox / sumps and axles.
Applicable to Peugeot and Renault vehicles since 1983.
Chrome vanadium with Satin polished finish.

6pc Oil Drain Plug Key Set
3/8in.Dr Square Socket Bit Set with Rail
Sizes : 8mm | 10mm | 12mm | 14mm | 3/8in. | 1/2in.
Suitable for sumps / gear boxes and back axles
on Citroen and Peugeot vehicles.

6pc Sump Plug Key Set
Hex Sizes : 8 | 9 | 10 | 11 | 12 | 14 | 17 | 19mm
Square Sizes : 8 | 10 | 12 | 14mm
Double ended steel keys with hex and square profiles.
Suitable for drain plugs on engine sumps, gear boxes and back axles.
Ideal for BMW and most other vehicles.

12pc Oil Drain Plug Key Set
For use with 3/8in.Dr Ratchet
Hex keys : 8 | 9 | 10 | 12 | 14 | 17mm | 3/8in.
Square Keys : 8 | 11 | 13mm | 3/8in.
With 3/8in.Dr Sliding T-Bar.
Applicable to Oil Sumps on most modern vehicles

14pc Oil Drain Plug Key Set
For use with 17mm sockets or spanners
Hex keys : 8 | 9 | 10 | 12 | 14 | 17mm | 3/8in.
Square Keys : 8 | 9 | 10 | 11 | 12 | 13mm
Spline Key : M16 Tamper-proof
Applicable to most modern vehicles

20pc Oil Drain Sump Plug Key Set
3/8in.Dr Flexi-Head Power Bar
Hex Bits : 8 | 9 | 10 | 12 | 14 | 17mm
Spline Bit : M16
Square Bits : 7 | 8 | 10 | 11 | 12 | 13 | 14mm | 5/16in.
Square Socket : 10mm
Star Bit : T45
Triangular Bit : 10mm
VAG Plastic Plug Bit

Magnetic Oil Sump Plug Removal Tool
Avoids contact with hot dirty oil.
For use after the drain plug has been loosened.
Also used as a pick up tool.

11pc 3/8in.Dr Pipe Plug Socket Set
Male : 3/16 | 1/4 | 9/32 | 5/16 | 11/32 | 3/8in.
Female : 1/4 | 9/32 | 5/16 | 11/32 | 3/8in.
Tapered Male Square Drive and
Chamfered Female Square Drive aligns socket to fastener quickly
Low profile design provides easy access to tight spaces
Fits any 3/8in.Dr ratchets, bars etc.
Chrome-Molybdenum for high torque impact tools.

6pc BMW Nylon Oil Drain Plug Set
Replacement Nylon Oil Drain Plugs for BMW vehicles.
M24 x 1.5 Thread with O-Rings
PA6-GF12 Plugs

5pc Ford Plastic Oil Drain Plug Set
Replacement Nylon Oil Drain Plugs for Ford vehicles.
Heavy Duty Plastic Plug.
OEM Code : 1830727

6pc Ford / PSA Nylon Oil Drain Plug Set
Replacement Nylon Oil Drain Plugs for Ford and PSA vehicles.
37mm / 29.5mm Diameter O-Rings
PA6-GF35 Plugs

5pc Oil Drain Plastic Plug Set
Replacement Nylon Oil Drain Plugs for Mercedes Benz vehicles.
Complete with sealing ring.
OEM Code : A0029902017

5pc Oil Drain Plastic Plug Set
Replacement Nylon Oil Drain Plugs for VAG vehicles.
Also suits CAM cover on 1.6 / 2.0 TDI diesel engines.
OEM Code : 06L 103 801.

9pc VAG Nylon Oil Drain Plug & Key Set
Replacement Nylon Oil Drain Plugs for VAG vehicles.
With T40 Star Bit and Sump Plug Key.
Drain plugs should be replaced at the time of the oil change.
Plugs also used on some VAG engine heads.

534pc Oil Drain Plug Screws and O-Ring Set
Plug Screws : M10 | M12 | M13 | M14 | M15 | M16 | M18 | M20
O-Rings : 6 | 8 | 10 | 12 | 13 | 14 | 15 | 16 | 18 | 20mm - Aluminium

13pc Drain Plug Kit
M10 x 1.25 mm - PSA HDI
M12 x 1.5 mm - Renault / Toyota / Nissan / Mercedes
M14 x 1.25 mm - PSA Diesel HDI
M14 x 1.5 mm - VW / Audi / Ford / Opel / Mercedes / Fiat JTD
M16 x 1.5 mm - PSA / Renault / Volvo
M18 x 1.5 mm- PSA / Renault / Volvo / Toyota / Mitsubishi
M20 x 1.5 mm - Fiat / Alfa / Lancia
M22 x 1.5 mm - PSA / Fiat
With Copper Seal Rings

7pc Oil Pan Thread Repair Set
with M13 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M15 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M17 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

7pc Oil Pan Thread Repair Set
with M20 Tap
6 Oil Drain Plugs with washers
Suitable for Cars / Motorbikes / Trucks and Vans

24pc Oil Pan Thread Repair Set
Taps - M13. M15. M17. M20
Oil Drain Plugs may need to be replaced because of stripped threads
Suitable for Cars / Motorbikes / Trucks and Vans

114pc Oil Pan Thread Repair Set
Ideal for repairing sump / gearbox and differential drain plug threads.
Used to tap the damaged thread slightly over size
then fit a new drain plug and washer supplied.
Suitable for most cars and light commercial vehicles.
Tap Sizes - M13 x 1.25 to M22 x 1.5mm