3pc Flexible Screwdriver Set with Bits
600mm Long Flexi-Shaft Drivers
7mm Socket Driver
1/4in.Dr Socket Driver
Screwdriver Bit Holder
with Flat | Phillips | Star Bits

3pc Pliers Set
11in. / 285mm
Straight / 20 degree Angle / 45 degree Angle

4pc Pliers Set
11in. / 285mm
Style : Straight / 10 degree / 45 degree / 90 degree Angle

11in. Long Reach Pliers - 5pc Set
Straight / 45 degree | 90 degree | Offset and 1/2in. Hose Pliers

3pc X-type Long Reach Pliers
Flat Nose 12in.
Long Nose 13in.
Bent Nose 13in.

3pc Hose Ring Pliers Set
16in. / 400mm
Diameter : 8 | 13 | 19mm

9pc Hose Ring Pliers Set
11in. / 280mm
Ideal for working in confined areas
Non-slip PVC dipped cushion grip handles
Flat nose
Circle Nose : 8 | 13 | 19mm Diameter
Needle Nose : Straight | Offset | 45 and 90 degree
with Diagonal cutters

3pc Pistol Grip Pliers Set
11in. Long Reach
Hose and Cable Pliers
Long Nose - Straight
Bent Nose - 90 degree
Double leaf spring
Ideal for removing and installing rubber hoses on fuel lines etc

Long Nose Pliers
16in. / 400mm long handle
Straight

Long Nose Pliers
16in. / 400mm long handle
20 degree

Long Nose Pliers
16in. / 400mm long handle
45 degree

Long Nose Pliers
16in. / 400mm long handle
90 degree

Multi-Direction Hose Clip Pliers
16mm wide head with Ribbed Surface to firmly hold clips.
For Audi / VW fuel line | tank ventilation line clips and radiator hose clips

Multi-Direction Hose Clip Pliers
16mm wide head with Ribbed Surface to firmly hold Clamps.
For Audi / VW fuel line | tank ventilation line Clamps and radiator hose Clamps.

Hose Clip Pliers
Clic and Clic-R Type
For releasing and refitting reusable hose clips.

9in. Double Ear Clip Pincer
Dual purpose side jaw design
allows clips and Clamps to be applied or removed.

Clic-L Hose Clip Pliers
Remove and insert Clic-L hose clips
For GM / Mercedes / PSA | VAG group vehicles
Chrome Plated Handles with Hardened Jaws.
Length : 175 mm

VAG Fuel Line / Hose Clip Pliers
for use on small self-tightening hose clips with flat 3-terminal ends
found on fuel lines / cooling and water hoses.
Hardened - non-warping burnished self-opening spring jaws.
Suitable for Audi / Seat / Skoda and Volkswagen vehicles.
Maximum jaw opening : 24mm
Total length : 190mm

VAG Fuel Line Pliers
Rotating Jaws - ideal for tight areas.
For use on TAG type hose clips fitted to VAG fuel lines.
Applicable to : Audi / Seat / Skoda / Volkswagen
Spring assisted grip.

Swivel Jaw Hose Clip Pliers
with ratchet locking mechanism
Makes removing and installing ring type clips easy

Flat Band Hose Clip Pliers
With Ratchet Locking Mechanism.
Swivel Tips for multi-angled access.

2pc Hose Clip Pliers Set
8.5in. / 220mm
with Swivel V Slot and Cross Slot Jaws
Ideal for confined and hard to reach spaces
For fuel or coolant pipe spring clips and ring type clips.

Offset Hose Clip Pliers
with ratchet locking mechanism and swivel jaws
Makes removing and installing ring type clips easy

Bent Nose Hose Clip Pliers with Swivel Jaws
For use with Clic / Clic R type hose Rings / Clips
Rotating Jaws are ideal for inaccessible positions.
190mm Long

Turbo Boost Hose Clip Pliers - VAG
with Ratchet and Locking mechanism.
Essential tool for the specialised clips on the compressor hose.
Applicable to :
Audi A3
Skoda Octavia
Volkswagen Passat 2.0 TDi / 05 | Touran | Golf V

Ratchet Hose Clip Pliers
Jaw Range 22 - 55mm
For flat-type hose Clamps in hidden and hard to reach areas.
Fits most ring-type or flat-band hose Clamps.
The Clamps are held open with a ratchet locking mechanism.

Hose Clip Pliers
Straight with Double Jointed
Extra Long : 430mm
Capacity : 0 - 50mm
Special Jaws make it suitable for ring and flat band hose clips.
Double jointed feature means it is useful in tight areas.
Position lock kee

Hose Clip Pliers
Double Jointed with 35 Degree Angle Head
Extra Long : 430mm
Capacity : 0 - 50mm
Special Jaws make it suitable for ring and flat band hose clips.
Double jointed feature means it is useful in tight areas.
Posit

Flexible Hose Clip Pliers
For replacing fuel oil and water hose
630mm wire flex
Ideal for confined spaces

Flexible Hose Clip Pliers
Suitable for VAG vehicles with 2.0TDi engines.
Also suitable for tight spaces because of bowden cable operation
With locking and release Button

Long Reach Hose Clip Pliers for 18 - 54mm Clips
With Ratchet mechanism for reduced effort.
For self-tightening collars with a diameter of 18 to 54mm.
Flexi-cable shaft holds position for unrivalled accessibility.
Suitable for most vehicle makes and models.

7pc Hose Clip Pliers Set
Hose Clip Pliers
Swivel Jaw Spring Wire Clip Pliers
Swivel Jaw Spring Band Clip Pliers
Flat Band Clip Pliers
Angled Flat Band Clip Pliers
Hose Remover Pliers
Clic-R Collar Pliers

9pc Hose Clip Pliers Set
Hose Clamp Pliers
Swivel Jaw Spring Wire Clip Pliers
Swivel Jaw Spring Band Clip Pliers
Flat Band Clip Pliers
Angled Flat Band Clip Pliers
Hose Remover Pliers
Clic-R Collar Pliers
Screwdriver
Hose Pick Tool

Hose Removal Pliers with Locking Pin
Easily disconnects hoses by gripping firmly the tube or line.
Jaw for 3/16 | 1/4 and 3/8in. tubes and hose lines.
Especially suitable for hoses connected to tubes or lines with smooth surface
where exercising pushing force is not possible.
Pointed jaw tip allows access to confined spaces.
Special locking design enhances secure gripping.

Hose Removal Pliers
For 5/32in. to 1/2in. Fuel or Fluid Hose

4pc Pipe Line Stopper Kit
Sizes : Banjo | 3/8 | 5/16 | 1/2 Inch
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with an

4pc Pipe Line Stopper Kit
Spring loaded design for use with all Automotive Fluids.
Use to plug steel lines once disconnected.
Prevents fluid leaks and contamination during service.
Use with any automotive fluid.
Spring loaded design installs in seconds.
Sizes - Banjo | 3/8 | 5/16 | 1/2 Inch

Hose Clip Nut Driver
1/4in.Dr with Flexible Shaft
supplied with 6 / 7mm and 7 / 8mm reversible sockets

3pc Hose Clamp Set
Clamp Sizes : 6 | 7 | 10in.
Ideal for Brakes Radiators Air Conditioning etc

3pc Hose Clamp Pliers Set
90 Degrees Jaws
Tube Capacity : 10 | 15 | 24mm
For Clamping Brake / Coolant and Fuel Hosing

4pc Fluid Line Clamp Set
Sizes : 10 | 15 | 25 | 45mm
3/8 | 1/2 | 1 | 1-3/4in.
Stops liquid flow without damage to hoses

3 Way Hose Clamp Tool
Use with a 14mm Wrench or 1/4in.Dr Bar
Max Capacity - 65mm | 106mm
This Tool has 3 different jaws to allow multiple use with various hose clips and Clamps

2 in 1 Hose Clamp Tool and Locking Pliers
Hose Clamp : 2 - 53mm
Locking Pliers: 0 - 48mm
Magnetic Jaws and Adjustable Thumb Wheel
Body : Zinc Alloy / Chrome Plated

5pc 8 - 12mm diameter Hose Clips

5pc 10 - 16mm diameter Hose Clips

5pc 12 - 20mm diameter Hose Clips

5pc 16 - 25mm diameter Hose Clips

5pc 18 - 32mm diameter Hose Clips

5pc 25 - 40mm diameter Hose Clips

4pc 30 - 50mm diameter Hose Clips

3pc 40 - 60mm diameter Hose Clips

3pc 50 - 70mm diameter Hose Clips

3pc 60 - 80mm diameter Hose Clips

3pc 70 - 90mm diameter Hose Clips

Metal Band Hose Clip Kit
8mm wide and 3M long with 8 Tension Clips

16pc Hose Rings / Clamps
2 x 13. 16. 18. 20. 23. 25. 27. 32mm

26pc Hose Clip / Clamp Assortment
Fitted with Plastic Keys.
Ideal for domestic and industrial applications.
Durable keys are removable to prevent tampering.
For most popular hose sizes -
13mm | 16mm | 19mm | 22mm | 25mm
1/2in. | 5/8in. | 3/4in. | 7/8in. | 1in.

34pc Hose Clip Set - 25 to 70mm
25 | 32 | 40 | 45 | 50 | 55 | 65 | 70mm Diameter

160pc O-Clip Single Ear Assortment
Stainless Steel Ear Clips
For Industrial / Automotive / Electronic or home applications.
Ideal for securing - hoses / pipes / cables / tubes / fuel lines etc.
Sizes: 7 - 8.5 | 8.5 - 10 | 9.8 - 11.8 | 11.8 - 13.8
13.2 - 15.7 | 15.3 - 18.5 | 17.8 - 21 | 20.2 - 22.8mm

175pc O-Clip Double Ear Assortment
Zinc Plated Double Ear Clips
Suitable for CV Joint Boots also Air and Fluid Hoses.
Sizes : 5 - 7 | 7 - 9 | 9 - 11 | 11 - 13
13 - 15 | 15 - 18 | 17-20 | 20 - 23 | 23 - 27mm

135pc Brake Pipe Nut Set
Short Female Brake Nut : M10 x 1.0
Short Female Brake Nut : 3/8in. UNF
Short Male Brake Nut : M10 x 1.0 x L17mm
Full Thread Male Brake Nut : M10 x 1.0 x L16mm
Long Male Brake Nut : M10 x 1.0 x L20mm
Long Male Brake Nut : 3/8in. UNF x L20mm
For use with 3/16in. Pipe Metric and UNF sizes.

6pc Seal Remover and Hose Pick Set
Easily remove seals or 0-rings
Angled blade ideal for removing seals in confined spaces.

19pc Windscreen Washer Pipe Repair Kit
For replacing broken and degraded hoses in windscreen -
headLight and rear window washer systems - No clips required.
With : Mini Hose Cutter and 4M Clear PVC Tube
4.8mm straight and angled washer pipe elbow connector.
4.8mm windscreen washer T-piece connector.
4.8mm windscreen Non-return valve.
Ideal for mainstream manufactured or kit car washer systems.