Replacement Abrasive Stones
30mm | 1-1/8in. | 220 Grit
for CT2756 Cylinder Hone

Cylinder Hone
with 100mm / 4in. Abrasive Stones
Range : 50 - 180mm / 2 to 7in. Bore Diameter
Flexible shaft for ease of use and self centring

Replacement Abrasive Stones
100mm | 4in. | 220 Grit
for CT2757 Cylinder Hone

Mercedes Brake Spring Installer
Unique tool for Mercedes vehicle parking brake.
For disassembly and assembly of spring clips on rear disk brakes
Length : 132mm

Brake Drum Gauge
Size Range 160mm - 360mm
Metric and Imperial Scale.
Developed to measure the wear limit on brake drums
as well as the diameter of the drum and then establish
the shoe position prior to drum re-fitting.
For outer and inner measurements.
With fine adjustment.

5pc Wheel Cylinder Cup / Seal Installation Rocket Set
Tapered Cones enable wheel cylinder o-rings and seals
to be installed easily without damage to the brake cylinder assembly.
Sizes :
1 - 3/4'' | 44.5 / 47.5mm
1 - 7/8'' | 48 / 51mm
2 - 1/8'' | 54 / 57mm
2 - 3/16'' | 56 / 59mm
2 - 5/16'' | 59 / 62mm

Wheel Bearing Circlip Removal / Assembly Lever Tool
Unique lever tool with specially shaped hook that allows
the easy removal and fitting of wheel bearing internal circlips.
Applicable to Vauxhall / Opel / Ford / PSA / Fiat and VAG vehicles.
Ideal for use on the Vauxhall Adam and Ford Kuga,
also suitable for Ford DCT clutch pack internal clip,
superb for clips without circlip holes.

Wheel Hub Removal Tool
Designed to allow the easy removal of seized wheel hubs.
Covers most cars and LGV vehicles with 5 / 6 / 8 hub assemblies.
Apply the spindle to a solid point on the hub.
The spindle must put pressure on at least two solid points
on the hub to completely remove the hub.
Spindle must be lubricated before use.

Flywheel Puller for Suzuki Motorcycles
M50 x 1.5mm
Suitable for the following Suzuki models :
GV | LS | LTA | LTF | VL | VS | VX | VZR

Flywheel Puller or KTM / Suzuki / Yamaha Motorcycles
M33 x 1.5mm
Suitable for the following models :
KTM : 625 SMC | 640 LC4 Adventure | 640 LC4E | 690 RFR
SUZUKI : GSXR 600 | GSXR 750 | GSXR 1000
YAMAHA : WR 450F | YFZ 450

Heavy Duty EVA Foam Work Mat
100 x 49.5cm Dual Layer
Hard Wearing
Water and Oil Resistant
Ideal for the professional and enthusiast mechanic.

Jumbo Size Bent End Pry Bar
1204mm Long with Go-Thru Handle

8pc Hydraulic Nut Splitter Kit
Hydraulic Ram provides up to 10 tonnes of direct non-twisting thrust
that is more effective and secure than a mechanical thrust screw.
Fully threaded body allows for quick and easy height adjustment.
Splitter Bodies : 3/8in. | 1/2in. | 5/8in. | 3/4in. | 1in. Diameter Capacity.
Threaded Attachment Sleeve.

18mm Stud Extractor
With 3/4in.Dr. and 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

20mm Stud Extractor
With 3/4in.Dr. and 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

22mm Stud Extractor
With 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket

24mm Stud Extractor
With 36mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

30mm Stud Extractor
With 46mm External Hex Drive.
Works on screws without heads.
Removes and installs studs without damage.
Quick and easy to use, no damage to the stud.
Safe clamping due to 3 rollers.
Stud screws can be screwed in or out without using counter nuts on the bolt.
Also for extra long studs that will go through the through socket.

11pc Stud Extractor Set
For extracting damaged and headless screws.
Sizes : 5 | 6 | 7 | 8 | 9 | 10 | 10.5 | 11 | 12 | 14 |16mm
with 3/8in.Dr / 1/2in.Dr and Go-Through Sockets
Use with 19 / 22mm Spanners or 3/8in. | 1/2in.Ratchets
Chrome-Vanadium

Connector Removal Tool for VAG / Porsche Vehicles
For safe and proper removing of most push & pull connectors
e.g. electrical connector on mass air flow sensor / MAF, pressure sensor / MAP,
ignition coil pack, headlight, fog light, level sensor, etc.
Can be used for following car types :
VW / Audi / Skoda / Seat / Porsche

7pc Hole Saw Set
Diameters : 25 | 32 | 38 | 45 | 50 | 56 | 62 mm
Working Depth : 33mm.
Saw Blade Material : 65Mn
For all drilling machines with hexagonal shaft mounting.
Suitable for drilling in Wood and Drywall Materials
e.g. plasterboard and OSB boards.
Safety lock for fixing the drill sprockets in the drill plate for high work safety.
Ideal for Cordless Tools with quick rotation stop.

Black Polishing Compound
Great for removal of scratches, pitting or rust from metallic surfaces
due to the impregnation of emery in the compound
Using this compound will save time and start the polishing process.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Blue Polishing Compound
A general use compound for all metals.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Brown Polishing Compound
General-purpose rough starting compound for initial buffing and polishing.
Can be used to cut and remove scratches and leave a smooth finish
Best used with softer metals and also used on wood.
For best results use with loose-leaf or stitched buffing wheels
to enable a powerful cutting action, apply little-and-often during use.

Green Polishing Compound
Provides a high shine finish on hard and soft metals.
Excellent results with platinum, chrome and stainless steel.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

Red Polishing Compound
Ideal for polishing jewellery and precious metals such as gold and silver.
This compound can also be used with plated metals.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

White Polishing Compound
Used for removing deep scratches from soft metals or
as a polishing aluminium, gold, silver, brass and copper.
For best results use with loose-leaf or stitched buffing wheels,
apply little-and-often during use.

8pc Sanding Swab Set - 150mm / 6in.
4 Grits : 120 | 180 | 400 | 800
Long shafts with double sided heads for difficult areas.
Designed for intricate sanding and polishing of wood,
plastic, and metal in dry applications.
Unique head shape and flexible shaft to reach areas
that ordinary sandpaper or files ca not reach.

11pc Polishing & Sanding Flap Disc Set
Stripping Disc
Felt Polishing Disc
Sponge Polishing Disc
Aluminium Flap Discs : 40 | 60 | 80 | 120 Grit
Zirconium Flap Discs : 40 | 60 | 80 | 120 Grit
Ideal for fabrication, de-burring, cleaning,
stripping and finishing of wood, metal and plastic.
For use with 115mm angle grinders / 22.2mm bore.

10pc Flap Wheel Set
Grit 80 |
Size : 31.5 x 10mm with 3mm | 1/8in. Shanks
Aluminium Oxide Flap Wheels
Suitable for a removing scratches / rust / corrosion and de-burring

12pc Sanding & Buffing Kit
115mm Backing Pad with Hook & Loop
with M14 Arbor for use with a power drill.
Sandpaper : 80 | 150 | 240 grit.
Sanding Pads : Red / 400 | Green / 600 | Grey / 800 grit.
Foam Pads / Orange.
Polyester Buffing Pads.
Multipurpose kit for use on wood, metal and paintwork.

12pc Buffing and Polishing Kit
115mm Backing Pad with Hook & Loop
M14 Arbor for use with a powered drill
Foam Flat and Waffle Pads
Polyester Buffing Pad
Multipurpose kit for use on wood, metal and paintwork
Max. Speed : 12500rpm

5pc Rotary Buffing Mop kit
Suitable for polishing various metals -
including Aluminium / Stainless Steel and Brass.
With 1/4in. Shank for use power and cordless tools.
Mushroom : 50mm / 75mm
Conical : 38mm
Column : 40mm
Wheel : 50mm

Impact Drive Stud & Hub Cleaning Tool Set for HGVs
For Air or Power Impact Wrenches with 1/2in.Dr
Suitable for HGV wheel studs up to 28mm diameter
with a maximum length of 80mm.
With Impact Drive Locking Sleeve and Disc Adaptor.
6 Abrasive Discs :
50 x 12 | 50 x 13 | 50 x 14mm.
60 x 16 | 60 x 22 | 60 x 28mm.

Rotary Abrasive Hub Cleaning Tool - 1/2in.Dr
Suitable for vehicle wheel hubs up to 150mm diameter
Optimized for wheel hubs with enlarged inner 90mm diameter.
For quick and easy removal of dirt and rust from wheel hubs
and brake discs with wheel support bolt.
Quick cleaning of the contact surfaces.
For use with air impact or power / cordless tools - 1/2in.Drive
Interchangeable abrasive velcro disc replacement - CT6186

Rotary Abrasive Hub Cleaning Disc
or Grinding Wheel
Replacement Disc for CT6185
Inner diameter : 90mm / Outer diameter 150mm

Abrasive Disc
Diameter : 100mm
Shank : 6mm
For use with Power Drills.
Silicon carbide coated nylon mesh with steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

Abrasive Disc
Diameter : 100mm
Bore : 22.2mm
For use with angle grinders.
Silicon carbide coated nylon mesh
with fibreglass backing disc and steel arbor.
For rust or paint removal / descaling / de-burring
and preparation of welding seams or graffiti removal.
For metal or stone cleaning / surface preparation and fabrication tasks.

24in. / 600mm Wrecking Bar
56mm Wide Mouth with Swan Neck
Fully Hardened and Tempered

Block Paving Gap Wedge Tool
900mm Long with Soft Grip Rubber Grips.
To enable repairs or adjustment.
Hammer point to knock in to tight spaces.
Foot lug for applying weight into gaps.
Hardened steel wedge.
Used to gap or space out blocks from block paving etc..

Adjustable Line Stretchers for Blocks
Clamping Capacity : 4in. to 12in.
Stretches Building Line Between Key Course Blocks
Cast aluminium construction.

4 External Building Profile Line Holders
Plastic line holder clips for external builders brick profiles
Fit any profiles that are 50mm x 50mm