Wi-Fi Endoscope - 5V DC
Suitable for pipeline inspection, air conditioning unit inspection,
venting systems and automobile applications.
Support System : IOS / Android
Camera Outer Diameter : 7.9mm
Image / Video Resolution : 2560 x 1440 / 1280 x 720.
Focal Length : 2 - 10cm
Frame Rate : 20fps
Viewing Angle : 70 degrees
Lights : 8 adjustable white LEDs

2pc Scraper Set
with Black electroplated shafts and Tungsten Carbide Tips
Blade Width : 16mm | 32mm. Handle : 150mm
For use on brake Calipers and back plate sliding faces,
exhaust manifolds, cylinder heads, gaskets
or any area to remove corrosion and debris.
Double edged tungsten carbide tipped blades,
remain very sharp and are precision ground.

Stretch Belt Installation Tool
For PSA / Vauxhall / Opel and Toyota
1.0L and 1.2L 3 cylinder engines from 2012.
Simple and effective method of installing the stretchy type water pump belt.
Ensures correct installation of the elastic belt
whilst reducing the risk of damage to the drive belt.
OEM Codes : 0109-1B | EN-52112-2

Exhaust Camshaft Holding / Adjusting Tool
for EB2ADTS Engines in
Citroen / Opel / Peugeot / Toyota Vehicles
Suitable for the following engine codes:
EB2ADTS | HNS | D12XHT | F12XHT
OEM Codes : 2000037072
0109-2E / 0109-2E1 | 01092E / 0109-2E2

Crankshaft Pulley Puller
For removing the vibration damper / pulley
installed on Ford 2.0 EcoBlue TDCi engines
when accessing the timing belt.
Applicable to a range of Ford Vehicles.
OEM Codes : 204-158-01 | 205-295
Crankshaft nose protector spigot / puller.

Ford Crankshaft Pulley Removal Tool
for EcoBlue 2.0L Engines.
This tool ensures the vibration damper can be removed without
causing damage to the bonded rubber section of the pulley.
Applicable to : Kuga / Ranger and Transit.
Thrust bolt / external hex drive - 11mm
Thrust spindle / external hex drive - 19mm
OEM Code : 303-1657

Fiat / PSA Timing Tool Set
for Alfa / Fiat / Ford / Lancia / Opel / Suzuki
For checking and adjusting the timing on
1.2 | 1.3 | 1.4 | 1.6 | 1.9 | 2.0 | 2.4 Engines.
Camshaft Locking and Adjusting Tools
Crankshaft and Flywheel Locking Tools
Injection Pump Adjusting Tools
Tensioning Tools
TDC Indicators.

Ford Timing Tool Set
for Ford / Mazda / VAG / Volvo
Provides checking and adjusting engine timing.
Camshaft / Crankshaft Locking and Adjusting Tools
Chain / Tooth Belt / Drive Belt Tension Tools
Crankshaft Sprocket Holder and Alignment Tools
Locking Bracket and Support Guides
TDC Indicator and Dial Test Indicator
Injection Pump Tools

Carbon Dioxide Manifold Gauge Set
For measuring pressure on air conditioning systems
using R744 refrigerant / carbon dioxide.
Includes Gauge and Valve Block with Hook.
High and Low Pressure Hoses with
connecting hose to service device.
Units in PSI / Mpa
G1/4-19 thread.
Steel braided hoses for CO2

Universal Radiator Pressure Tester & Vacuum-Type Cooling System Kit
Adjustable radiator test adaptor suits most vehicles.
Tests for leaks and allows quick change of coolant in vacuum systems.
40 - 75mm vacuum purge and refill tool connection
fits nearly all types of radiators

Coolant Pressure Test Cap
for Ford and Volvo Vehicles
Applicable to : Ford / Updated Type
Volvo : V70 / XC70
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Coolant Pressure Test Cap
for Vaxhall and Opel Vehicles - Updated Type
Use with Radiator Pressure Test Kits :
CT1585 | CT3380 | CT3923 | CT5665

Diesel Oil Filter Wrench - 1/2in.Dr
for Ford Transit 2.2 TDCi Engines.
For removing and installing fuel filters found in
Transit, Transit Custom and Tourneo Custom versions
manufactured since 2012.

74.5mm Oil Filter Wrench - 1/2in.Dr
for Fiat & Lancia Vehicles
Designed to fit metal spin-on oil filters
fitted to 1.0L mild hybrid engines as used on
Fiat 500, Panda and Lancia Ypsilon models from 2020 onwards.
Size : 74.5mm x 8 flutes.
Filter : OEM 46796687

23mm Ball Joint Remover
for Cars, Light Trucks and SUVs
Opening on the support fork : 23mm
Opening on the puller housing : 62mm
Max. pressure range : 50mm
Hex Drive : 19mm
Suitable for impact wrenches.

30mm Ball Joint Remover
for Cars, Light Trucks and SUVs
Opening on the support fork : 30mm
Opening on the puller housing : 62mm
Max. pressure range : 50mm
Hex Drive : 19mm
Suitable for impact wrenches.

32mm Ball Joint Remover
for Cars, Light Trucks and SUVs
Opening on the support fork : 32mm
Opening on the puller housing : 70mm
Max. pressure range : 92mm
Hex Drive : 26mm
Suitable for impact wrenches.

7pc Brake Caliper Rewind Tool Kit
For resetting brake pistons on Iveco Truck disc brakes
Suitable for Iveco Stralis / Euro cargo / Daily
With : 10mm Ratchet Wrench
Magnetic Rewind Tool with Backing Plate
Reset Discs with 2 and 3 pins
8mm Hex Bits with 10mm drive
NOTE : 2 Pin Reset Disc is 3/8in.Dr

Handbrake Shoe Retaining Spring Tool
with 2mm wide guide slot.
for Mercedes-Benz V-Class Vehicles.
Enables access to the retaining clips behind the rear drive flange.
For easy removal and fitting of the shoe retaining clips
on the handbrake shoes.
Applicable to : Vito / Vitano -
Typ 638 / 1996 - 2003
Typ 639 / 2003 - 2014
Typ 447 / from 2014

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M5 to M8.
Contents :
Drill : 8.5mm
Tap : 1/8in. - BSP28
6 Bleed Nipple Inserts : 1/8in.- BSP28 x 30mm

8pc Brake Caliper Bleed Nipple Repair Kit
Suitable for repairing Brake Caliper Bleed Nipples : M8 to M10.
Contents :
Drill : 10mm
Tap : M11.5 x 1.0mm
6 Bleed Nipple Inserts : M11.5 x 36mm

Copper Tube Flaring Tool Kit
Imperial : 1/4 | 5/16 | 3/8 | 1/2 | 5/8 | 3/4in.
Metric : 6 | 8 | 10 | 12 | 16 | 19mm
Suitable for soft copper, aluminium, brass and other soft metals.
Allows easy and smooth operation saving time and energy.
Off-centre mounted cone spins on an axis for a uniform shape.
Arc frame ergonomic yoke designed with double ring bar
guarantees a professional job with permanent levelling.
Include tools for shortening or de-burring
and 45 degree single flaring of pipes.

85mm Hub Nut Socket - 1in.Dr / 12-point
for IVECO trucks and BPW / SAF trailers
Suitable for high tightening and loosening torque.
Can be used with an impact wrench or torque wrench.
Height : 60mm
External Diameter : 107.50mm

20V Cordless Impact Wrench
1/2in.Dr with 20V 4.0AH Li-Ion Battery.
Max Torque : 550Nm.
No Load Speed : 0 - 2800rpm
Max Impact Rate : 0 - 3000bpm
Battery Charger : 230V
Charging Time : 1 Hour

20V Cordless Impact Wrench
3/4in.Dr with 20V 4.0AH Li-Ion Battery.
Max Torque : 1200Nm.
No Load Speed : 0 - 1600rpm
Max Impact Rate : 0 - 2100bpm
Battery Charger : 230V
Charging Time : 1 Hour

19pc Air Hammer Chisel Set
Air Hammer with a wide range of accessories for multiple jobs.
Max. Operating Pressure : 6.38 bar
Avg. Air Consumption : 4 cfm
Piston Stroke : 3 / 3 / 4in.
Blows Per Minute : 2200 bpm
Bore Diameter : 3/4in.
Air Inlet : 1/4in.
Ideal problem solver for opening rusted screw connections
and for loosening components.

7pc Air Impact Chisel Adaptor Set
Ideal for removing rust or loosening rusty bolts and components.
Chisels have different profiles to facilitate
dismantling and protecting the surface of components.
Suitable for ball joints, bearings, bushings, sleeves etc.
For all air chisels with 10mm 6pt or round adaptor.
Material : Chrome-Molybdenum.

6pc Air Hammer Drift Set
Extra-long air impact drift set
For the extraction of shafts, studs and screws stuck in deep holes.
Sizes : 5.2 | 6.5 | 6.9 | 7.7 | 9.3 | 12.7mm.
These are the most frequently used sizes.
Round shaft : 10mm diameter

Surface Blaster Kit
Air Blaster Tool with Auxiliary handle and Hub
360 degree Swivel Connector
Air Adaptor
3 Wire Wheels
Stripping Wheel
Eraser Wheel
Suitable for smooth surfaces on vehicles
and other surfaces - aluminium, metal, glass and plastic.
For professional removal of rust, adhesive residues, paints and foils.

Heavy Duty Adjustable Wheel Dolly
Effortlessly install and remove truck wheel assemblies
with three positions for rollers on all 10in. to 22.5in. wheel size.
Protect expensive rims and wheel bolts with a compact design
that allows for one-person operation,
making it easy to collect and transport tyres and rims.
Max. Capacity : 250kg
Perfect for tyre shops and garages.

Chain & Lever Bock
Rated Load Capacity : 0.5T
Standard Lift Height : 3M
Chain Diameter : 4 x 12mm
Full Load Hand Force : 260Nm
Well-designed brake makes this ratchet puller hoist
more stable and safer to manoeuvre, preventing sudden
drop or chain clog during operation avoiding damage.
The hook has a safety latch and can rotate 360 degrees
without any limitation.

Chain & Lever Bock
Rated Load Capacity : 1.5T
Standard Lift Height : 3M
Chain Diameter : 7 x 21mm
Full Load Hand Force : 210Nm
Well-designed brake makes this ratchet puller hoist
more stable and safer to manoeuvre the object, preventing
sudden drop or chain clog during operation avoiding damage.
The hook has a safety latch and can rotate 360 degrees
without any limitation

Mobile Workstation
Automotive service table ensures easy and efficient
transportation of tools and parts to and from your vehicle.
With durable heavy duty steel construction and
telescopic post - adjusts from 880mm to 1220mm.
The extra-wide work tray measures740mm by 510mm
offering plenty of room for all your tools and small parts.

5pc Brass Pin Punch Set
Diameter Sizes : 6 | 10 | 12 | 16 | 19mm x 145mm Long
Brass - Non Marring and Non Sparking prevents damage during use.
With Improved knurled grip - allows for better control when striking.
Ideal for removal or loosening of parts and pins.
Supplied in a foam tray for use in your tool box.

9pc Axle Spindle Rethreading Set
For cleaning or repairing spindle threads,
axle studs and wheel stud threads.
Contents :
8 Dies : M20 x 1.25 | M20 x 1.50 | M22 x 1.00
M22 x 1.50 | M24 x 1.50 | M24 x 2.00
13/16in. x 20 UNEF | 3/4in. x 20 UNEF
with 1/2in.Dr extension Bar

LED Headlight
Max. Lumen : 250LM
Battery : 500mAh / Rechargeable
Charging time : 2 Hours
Working time : 2.5 Hours
With a USB C charging cable
Waterproof rubber switch
Modes : white light / warm light / flash
Waterproof rating : IP4

LED Headlight
Max. Lumen : 250LM
Battery : 500mAh / Rechargeable
Charging time : 2 Hours
Working time : 2.5 Hours
With a USB C charging cable
Waterproof rubber switch
Modes : white light / warm light / flash
Waterproof rating : IP4

17pc Bi-Metal Hole Saw Kit
HSS 2mm thick high strength hard alloy steel blades.
with improved precision and cleaner / smoother cutting.
The chip removal groove on the side of the hole saw
rapidly discharges chips for easier clean-up.
Sizes : 20 | 2 | 25 | 29 | 35 | 40 | 44 | 51 | 57| 60 | 68mm
25/32 | 7/8 | 1 | 1-1/8 | 1-3/8 | 1-9/16 | 1-3/4 | 2 | 2-1/4 | 2-3/8 | 2-11/16 inch
Includes : 2 x Mandrels / 3 x Drill Bits / 1 x Hex Key
Perfect for cutting holes in metal, wood, PVC board, plastic and drywall.

Tile Cutter - 600W
180mm Diameter Blade / 22.2 Bore / 2.2mm Thick
230V / 50Hz
Max Speed : 2990rpm
Table Size : 386 x 397mm
Max Cutting Depth : 34mm at 90 Degrees | 17mm at 45 Degrees.

180mm Continuous Rim Cutting Disc
2.2mm for Electric Tile Cutting Machines
Max - 80m/s
Max - 8500rpm
Bore - 23mm
Suitable for CT3097

10 Metal Grinding Discs - 100mm
6mm Thick
Bore : 16mm
Max. Operating Speed : 80m/s
Max. Speed : 15200rpm
Suitable for CT1083 - Air Grinder

2pc Rotary Wire Brush Adaptor Set
M14 x 2 Adaptor to 8.3mm Hex Shank for standard drill chuck.
M14 x 2 to SDS Shank for SDS chuck drills
Suitable for Rotary Wire Brushes : CT1396 | CT2476 | CT2477
CT2478 | CT2479 | CT2480 | CT2481 | CT5245 | CT5246.
Suitable for Diamond Hole Saws : CT6135 | CT6136
CT6137 | CT6138 | CT6139 | CT6140 | CT6141.

2 x Foldable Saw Horses
Heavy duty box section steel with powder coated finish.
Telescopic action with height adjusting locking bars.
Dual locking safety arms with
folding support braces for rigidity when working.
Quick and easy to assemble and fold flat for easy storage.
Open size : 680 x 580mm
Width when folded : 180mm
Adjustable Height : 800 - 1300mm
Max load : 150kg.

10pc Reciprocating Saw Blade Set for Wood
150mm / 6TPI HCS Blades
200mm / 6-10TPI HCS Blades
240mm / 5TPI HCS Blades
Features an aggressive extra sharp tooth profile
optimised for fast straight and plunge cutting in -
Construction Timber / Chipboard / MDF
Plywood and Plastic.

12pc Bi-metal Reciprocating Saw Blade Set
Assorted heat treated Bi-Metal Reciprocating saw blades
Perfect for cutting Metal, Wood and PVC or general job site work.
The Bi Metal construction allow the blades to be flexible yet
continue to cut much longer than a standard blades.
6in. - 6TPI / 18TPI Bi-Metal Blades
8in. - 14TPI Bi-Metal Blades
9in. - 6TPI / 10TPI Bi-Metal & DEMO Blades
Includes Storage Tube.

U-Bolt
Size : 1/2 x 3-1/2 x 5-3/4in. | M12 x 90 x 145mm.
U-Bolt with Plate and Hex Nuts attached.
Designed for fastening products to pipe, wood, etc.
Zinc plated.

U-Bolt - Square
Size : 3/8 x 3 x 7in. | M10 x 75 x 175mm
Square U-Bolt with Plate and Hex Nuts attached.
Designed for securing various products to
rectangular wood and metal objects.
Zinc plated.

U-Bolt - Square
Size : 3/8 x 4 x 3in. | M10 x 100 x 75mm
U-Bolt with Plate and Hex Nuts attached.
Designed for securing various products to
rectangular wood and metal objects.
Zinc plated.

U-Bolt - Square
Size : 5/16 x 2 x 4-3/4in. / M8 x 50 x 120mm
U-Bolt with Plate and Hex Nuts attached.
Designed for securing various products to
rectangular wood and metal objects.
Zinc plated.

5 Pocket Leather Tool Belt
Split Leather
Heavy Duty Nylon Belt
2 Large Pockets and 3 Smaller Pockets
Nail Pouch
Metal Hammer Loop
Leether Tool Holder